Dakota R/T Club Forum  

Go Back   Dakota R/T Club Forum > Supporting Vendors > Flyin Ryan Performance

Thread Tools Display Modes
Old 03-20-2013, 06:27 PM   #1
Dakota RT
Join Date: Jan 2012
Location: Flushing, NY
Posts: 20
Dakota RT is infamous around these parts
Default My experience ...

...has been nothing but a joy!

I've been working with him for a year now, so I have some substantial experience with him. I might even be one of the first from this site to deal with him.

To start, Ryan's personality is spot on. He is straight up & personable. He says it like it is and means what he says. When we first formally introduced each other, he told me some of his background and past experience with the auto enthusiast world. Being involved myself for the past 10 years or so, I can tell someone who know's their stuff after a conversation or two, and he is certainly knowledgeable!

Now, my experience with his tuning has been great. He's been extremely thorough...as a matter of fact I don't think you can be more thorough with an SCT on a JTEC DCX. We started talking about our goals, and where the engine and drivetrain was at. After further analyzing, we discovered my PCM was one of those unlucky "death flash" ones....no wonder it was running like utter dogs#!t. So we started with a base tune for a stock PCM with my year/options and went from there. The stock tune without the "death flash" was already an awesome improvement. I was so happy that day, I vividly remember how excited I was once I uploaded it. He giggled and told me he didn't do much but give me a stock tune, but it already was an improvement from the "death flash" . He even taught me how to program my ScanGauge II with coding, I had no clue before hand how to do it, but he called me up one day and we went through it and programmed it. We went through every aspect of the tuning process. He paid attention and tweaked as needed to accomplish our goals. He also guided me in the right direction as far as which wide-band setups are available. As I type this, I have a thorough library of ~20 tunes for my truck, all a notch more aggressive than the other. This was done in order to create his library of standards as well from what I understand. We are also working on a way to remove EVAP from 01'-03' R/Ts.

My truck is only in use in the warm summer months, so we've been on pause since November, but we have already discussed some changes we're going to make as soon as the weather permits.

Overall, I am very happy and I personally recommend him to anyone in need (already have to a few people). He's not only a "tuner" or a "porter", he is also considered a good friend. He's been a huge contributor to my build and without Ryan my truck wouldn't drive like it does now. He is THE MAN!

Last edited by Dakota RT; 03-20-2013 at 06:31 PM.
Dakota RT is offline   Reply With Quote
Old 03-20-2013, 06:48 PM   #2
White Turbo

White Turbo's Avatar
Join Date: Jan 2008
Location: Washington
Posts: 8,017
White Turbo is on a distinguished road

" He giggled "

I've heard this comment before.

Ed Morris
11.17 @ 120.91 mph
Best 60': 1.54

DRTC # 578
White Turbo is offline   Reply With Quote
Old 03-21-2013, 04:57 AM   #3
Senior Member
skunkxracing's Avatar
Join Date: May 2011
Location: North Dakota
Posts: 922
skunkxracing is on a distinguished road

Originally Posted by White Turbo View Post
" He giggled "

I've heard this comment before.
You weren't reading 50 shades of gray were you???....
99 R/T RC IB
Megasquirt II
The eternal realist, If you don't like what I have to say put me on your ignore list
skunkxracing is offline   Reply With Quote
Old 03-21-2013, 09:01 PM   #4
Join Date: Feb 2008
Location: Cape Coral, FL
Posts: 5,801
BluRT00 is an unknown quantity at this point

Originally Posted by White Turbo View Post
" He giggled "

I've heard this comment before.
LMFAO! Giggles like a woman too.
BluRT00 is offline   Reply With Quote
Old 05-01-2013, 03:09 AM   #5
DRTC Member

FlyinRyan's Avatar
Join Date: Mar 2011
Location: Ft Myers, Florida
Posts: 787
FlyinRyan is on a distinguished road

Thanks, Anthony.
732 539 9614
FlyinRyan is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Who has first hand experience with the Akebono ceramic pads?? Motorhead Suspension, Brakes & Steering 6 04-28-2013 02:45 PM
Getting exhaust next spring..need Spintech experience Intense RT Engine Modifications 47 10-16-2009 01:51 PM
Anyone have experience with SCT ? dyno05 SCT Tuners & Tuning 13 08-03-2008 08:34 PM
Year One Experience!! 548ciDakota Event Forum 8 02-18-2008 02:09 AM

All times are GMT. The time now is 06:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.