+ Reply to Thread
Results 1 to 3 of 3

Thread: Custom HiPoTek Camshafts

  1. #1

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,974

    Default Custom HiPoTek Camshafts

    I have added a number of custom cam grinds to my store. These are typically not the off-the-shelf grinds offered by Comp Cams. When selecting most cams, you have the option of choosing a different lobe separation angle (LSA) than that specified. I will be adding a few more categories soon.


    Performance Cams: http://stores.hi-potek.com/-strse-3....Categories.bok

    Xtreme Cams: http://stores.hi-potek.com/-strse-3....Categories.bok


    XFI Cams: http://stores.hi-potek.com/-strse-3....Categories.bok

    Thumpr Cams: http://stores.hi-potek.com/-strse-3....Categories.bok

    Nitrous Cams: http://stores.hi-potek.com/-strse-3....Categories.bok

    4x4 Cams: http://stores.hi-potek.com/-strse-3....Categories.bok
    Last edited by 98Dak408; 07-13-2016 at 11:05 AM.

  2. #2
    FlyinRyan's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Katy, Texas
    Posts
    1,269

    Default

    Very cool, Richard!

  3. #3

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,974

    Default

    Very cool, Richard!
    Thanks Ryan!

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •