will a eaton m90 supercharger fit our 5.9? i have one laying around
will a eaton m90 supercharger fit our 5.9? i have one laying around
03 durango rt bright silver
Don't waste your time. I've tuned a few M90 4.0 Jeep 6s and they were too small to be effective for that application .
RYAN/TUNED
Got questions?!? Get the answers ->>> http://www.dakotart.com/forum/showth...estions-thread
For fastest response please text or email at ryan@frptuning.com ,please no PM's!!!
Ive got a magnuson m90 hybrid on my 5.0 ranger. Its small but adequate for 6psi. I'm going to try pulleying it up to 8, but thats its limit.
However, if your doing the large amount of work required to custom install a blower, youd be better off using one more suited to the application.
Chris
I have two of them in my garage from my buick it's from the 3.8
03 durango rt bright silver
M112 or dont bother but honestly I would never go through the bother of trying to mount an OEM eaton, they are not that efficient compared to a KB or whipple and for the PITA I wouldnt bother. JMO. I dunno when or if Chris O. is ever going to release his setup to mount a 2.2L KB but if it were me I would go that route if you are wanting a twin screw.
I'd want an m122, tvs2300 or 2.2+ screw for a 5.9
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website