+ Reply to Thread
Results 1 to 18 of 18

Thread: Fuel Pump Basket Adapter for Full Return Fuel System Dodge

  1. #1

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default Fuel Pump Basket Adapter for Full Return Fuel System Dodge

    This kit allows the plumbing of an 8AN fuel feed line, as well as a 6AN return fuel line, to the OEM Dodge or Jeep fuel pump basket.

    http://stores.hi-potek.com/-strse-FU...Categories.bok

    It includes the adapter and fittings necessary to replace the stock pressure regulator with the 8AN feed line, and install the 6AN return line fittings into the basket. Requires the drilling of one hole. Uses a supplied 5/16 hose barb for the fuel pump. The fittings can be turned 360-degrees for best placement.


    This can work on the following vehicles:

    Dakota 97-04 (uncertain of previous years)
    Durango 98-03
    Ram 94-03







    Last edited by 98Dak408; 07-13-2016 at 10:57 AM.

  2. #2
    99408kotar/t's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jun 2008
    Location
    Crown Point, IN
    Posts
    2,164

    Default

    Ill be ordering this soon
    410, 10.3 comp pistons, P&P Eddies, 254 cam, 30lb injectors, sct tuner, 3800 viper stall, 4:56 yukon gears, hotchkis tvs, m1 4brrl, 58mm f&b tb, 1.7 rr, electric fan, jm longtube headers, B&M hammer shifter, Cope Racing Trans, Viper Brakes, SRT8 Seats, nx wet kit(100 shot)
    best time 11.32 @ 118 1.59 60' on spray(old motor). 11.76@115 n/a(new motor)
    DD 07 SRT8 Charger 12.55@112

  3. #3
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    connecticut
    Posts
    1,331
    Blog Entries
    1

    Default

    I'd like a to order I have the Krc adapter which I haven't used yet it never looked right to me

  4. #4


    krs1r/t's Avatar
    want more inchs STROKE IT

    Status
    Offline
    Join Date
    Aug 2009
    Location
    vineland, nj
    Posts
    5,863

    Default

    very nice, so you will have to get a regulator, and mount it somewhere?

    Bad Luck Truck
    Current setup
    „R„block 429ci W5 heads 700hp N/A
    1/8 mile #'s 6.47@105 1.37 60’ 10.23@131

    Old 1/4 numbers below with 408
    Fastest N/A 2010,2011,2014
    477-RWHP ?-RWTQ

    11.244 ET @ 119.71mph N/A
    FOXHOLE RACING
    "If you like me good, if you hate me, even better!"
    Chris

  5. #5

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default

    very nice, so you will have to get a regulator, and mount it somewhere?
    Yes. The adjustable regulator will be mounted up by the fuel rails. There are a number of ways to plumb it.

  6. #6


    krs1r/t's Avatar
    want more inchs STROKE IT

    Status
    Offline
    Join Date
    Aug 2009
    Location
    vineland, nj
    Posts
    5,863

    Default

    nice job!

    Bad Luck Truck
    Current setup
    „R„block 429ci W5 heads 700hp N/A
    1/8 mile #'s 6.47@105 1.37 60’ 10.23@131

    Old 1/4 numbers below with 408
    Fastest N/A 2010,2011,2014
    477-RWHP ?-RWTQ

    11.244 ET @ 119.71mph N/A
    FOXHOLE RACING
    "If you like me good, if you hate me, even better!"
    Chris

  7. #7

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default

    nice job!
    Thanks man!

  8. #8

    Cregger's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Nov 2011
    Location
    Frederick, Md
    Posts
    517

    Default

    Looks good!!!

  9. #9

    Default

    Nice Richard
    408, HiPoTek, FRP Tuning, Martin Saine 46re
    12.33 @ 110
    2018 Renegade Raceway Summit Series Sportsman Champion

  10. #10

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default

    Looks good!!!
    Nice Richard
    Appreciate it!

  11. #11
    dakrt23's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jul 2008
    Location
    San Diego
    Posts
    1,540

    Default

    Awesome, this solves a big question mark for me and a future return style fuel system.

    Thanks for continuing to make awesome products for this community.
    HI. I like beer, burnouts, and boobies...


  12. #12
    blackknight's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2009
    Location
    wapato, wa
    Posts
    6,913

    Default

    always seem to amaze!

  13. #13

    KicknAsphlt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Denver, CO
    Posts
    1,834

    Default

    Quote Originally Posted by rattler360 View Post
    I'd like a to order I have the Krc adapter which I haven't used yet it never looked right to me
    I was told by KRC that their adapter goes where the factory regulator normally goes....haven't actually looked (haven't had to drop my tank yet, thankfully), so I can't confirm.
    - Justin


    '00 BW CC R/T
    '91 Graphite Turbo Targa Supra

    F-Quick Myspace Facebook

  14. #14


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    Quote Originally Posted by KicknAsphlt View Post
    I was told by KRC that their adapter goes where the factory regulator normally goes....haven't actually looked (haven't had to drop my tank yet, thankfully), so I can't confirm.
    That is correct.

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

  15. #15
    Senior Member

    Status
    Offline
    Join Date
    Aug 2011
    Location
    Pennsylvania
    Posts
    1,030

    Default

    How would this work if I were to run this setup but I have your 6an fuel rails...is that okay to size it down right when it fits the rails
    The Rides:
    2000 Black & Orange RC R/T (1 of 321)-Project Money Pit-Future ZCode truck
    2000 Flame Red CC R/T (1 of 800)- Light mods, show worthy
    2009 Yamaha Raider Raven 113ci (1900cc)
    2005 Cavalier LS Sport (DD-Canadian Z24 version)
    1953 Buick Skylark (1 of 1,690-estimated less than 50 known to exist)

  16. #16

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default

    How would this work if I were to run this setup but I have your 6an fuel rails...is that okay to size it down right when it fits the rails
    Yes that will be fine.

  17. #17

    Default

    Nice.
    513-Motorsports-LLC
    A couple of turbos on an old Dakota

  18. #18

    Cregger's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Nov 2011
    Location
    Frederick, Md
    Posts
    517

    Default

    anyone wanting to build a return system should buy these. they work great!
    Attached Images Attached Images
    10.25 @131 SBE 5.9 360 turbo!!!

    Check me out on YouTube - ThatTurboDakota

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •