+ Reply to Thread
Results 1 to 1 of 1

Thread: Custom HiPoTek 3.7 Big Bore Throttle Body

  1. #1

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,974

    Default Custom HiPoTek 3.7 Big Bore Throttle Body

    I am now machining 3.7 throttle bodies that provide a true and accurate bore for increased flow and performance. This throttle body has a 65.5mm bore.

    The bore is dimensionally accurate and smooth, is radiused at the top, the throttle shafts are machined on both sides for increased flow and strength, and to prevent flexing or possible breakage while under boost applications, they utilize low profile stainless steel button head throttle plate screws, the throttle plate is custom machined (not stamped or a reshaped carburetor plate) from T6061 aluminum, with the correct angle at the margins, and are set with the correct clearance in relation to the desired bore diameter, with the correct elliptical shape to perfectly fit the modified OEM throttle body.

    2002 http://stores.hi-potek.com/-strse-15...for/Detail.bok

    2003-2007 http://stores.hi-potek.com/-strse-15...for/Detail.bok

    You can also send me your core for modification.

    Either PM me or send me an email at Richard@hi-potek.com

    Thanks, Richard

    Last edited by 98Dak408; 07-13-2016 at 11:06 AM.

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •