How much wheels hp could one expect by porting an intake,heads, slightly bigger cam, a set of spintechs and all port matched?
50-75?
How much wheels hp could one expect by porting an intake,heads, slightly bigger cam, a set of spintechs and all port matched?
50-75?
1998 Silver RC SLT - Hughes 2.02 Heads, Mopar M1 4bbl Intake, Mopar 4bbl TB, 230/236 .515/.515 on a 110, 1.6 Roller Rockers, 4.10's, Spintech Headers, 3" Duals, X Pipe, Chambered Mufflers, 4/4 Drop, 727 Full Manual w/Transbrake, PTC 4500 Stall
12.90 at 104mph
Depends on who tunes it
Ryan tunes it.... If I can I'd go from a 214/218 544/520 to like a 228/232 dur and 585/575 lift or so.
Not a fan of spray haha
1998 Silver RC SLT - Hughes 2.02 Heads, Mopar M1 4bbl Intake, Mopar 4bbl TB, 230/236 .515/.515 on a 110, 1.6 Roller Rockers, 4.10's, Spintech Headers, 3" Duals, X Pipe, Chambered Mufflers, 4/4 Drop, 727 Full Manual w/Transbrake, PTC 4500 Stall
12.90 at 104mph
Hi Kyle, I think 40-50whp is realistic.
RYAN/TUNED
Got questions?!? Get the answers ->>> http://www.dakotart.com/forum/showth...estions-thread
For fastest response please text or email at ryan@frptuning.com ,please no PM's!!!
Ok that's kinda what I figured
1998 Silver RC SLT - Hughes 2.02 Heads, Mopar M1 4bbl Intake, Mopar 4bbl TB, 230/236 .515/.515 on a 110, 1.6 Roller Rockers, 4.10's, Spintech Headers, 3" Duals, X Pipe, Chambered Mufflers, 4/4 Drop, 727 Full Manual w/Transbrake, PTC 4500 Stall
12.90 at 104mph