+ Reply to Thread
Results 1 to 7 of 7

Thread: Conversion Motor Mounts Pre-Magnum Block 1997-2003 Dakota

  1. #1

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,974

    Default Conversion Motor Mounts Pre-Magnum Block 1997-2003 Dakota

    The following pics are prototype conversion poly motor mounts that will enable a pre-magnum LA small block to be used in a 1997-2003 Dakota. (The HiPoTek Crank Sensor Adapter will also be required in most cases for this swap.)









    Note: There is a difference between some of the LA block versions (318 LA, 340 LA, 340 LA replacement, 360LA, R3, 5.2/5.9 Magnum...) in regard to the driver's side LA style motor mount bosses. Some have narrow bosses and some have wide bosses.

    Edit:



    http://stores.hi-potek.com/high-perf...ota-1997-2003/
    Last edited by 98Dak408; 07-29-2014 at 11:53 PM.

  2. #2

    Default

    Looks good as always Richard.
    513-Motorsports-LLC
    A couple of turbos on an old Dakota

  3. #3

    y2krtaf's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Phoenix, Az
    Posts
    3,472

    Default

    Very Nice!!
    I could use some poly gen2 mounts for my ’96,hint,hint.

  4. #4

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,974

    Default

    Thanks guys!

    I could use some poly gen2 mounts for my ’96,hint,hint.
    I plan on tackling this some time this year. I'll start a different thread for that.

  5. #5

    y2krtaf's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Phoenix, Az
    Posts
    3,472

    Default

    Quote Originally Posted by 98Dak408 View Post
    Thanks guys!

    I plan on tackling this some time this year. I'll start a different thread for that.
    I look forward to it!

    As always great stuff man!

  6. #6
    Sick 660r's Avatar
    gen III traitor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Maryland
    Posts
    5,445

    Default

    This would be great for someone having a r3 go through shady dell cnc lightning program. I believe I shaves the magnum mounts but not the la.


    Quote Originally Posted by BluRT00 View Post
    Part your red sport out and buy a gen 2. Problem solved.

  7. #7

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,974

    Default

    Very Nice!!
    I could use some poly gen2 mounts for my ’96,hint,hint.
    Very soon.
    http://www.dakotart.com/forum/showthread.php?t=31784

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •