Ok so I called dodge customer care and Chrysler LLC neither of them could give me what I was looking for however the dodge rep did give me a lead.
She said:
"Go to dodge.com/dodgecare and request a build sheet wih your specific vehicle information on it. This should tell you the production number based on your specific type of vehicle (club cab, reg cab, color, etc) so go to that website and request a buildsheet give them your email address and your vin # then narrow down your options to your vehicle and tell them you want to see the production number for vehicles like yours for your specific year"
I have yet to find that website, I went into the address bar and typed in:
http://www.dodge.com/dodgecare
I got that the page could not be found lol
The Chrysler rep basically told me that none of their representatives were ever provided with that information and could never be able to look it up. The only way I could find it would be to look on the internet other than that I am S.O.L. lol.
So basically I got nowhere, anyway I hope you guys can find that build sheet info and look your trucks up, if you havent tried that already
2002 Flame Red RC R/T
272 RWHP 315 ft/lb TQ
218/226 Comp Cam, Stage 1 Ported EQ Heads, PRW 1.6 Roller Rockers, PIE Custom Tune, Full spintech exhaust with 3" side exit, 52mm Holley, Ported Kegger, Viper E-Fan, Powerdemon Trans, Hotchkis Springs, Leafs and Sway Bars, R/T 20's, Gen 3 viper seats, Custom "Rejected" State Inspection Sticker
Plenty More to come
I just contacted Chrysler about the production numbers. Waiting on response.
DRTC #1064
Update:
I'm going to try what they recommended and contact them, see what I can pull out. Otherwise we are going to have to find one of each truck in different colors and cab sizes and submit them one by one to get the information.
I would be willing to submit the information, as long as people in the club are willing to submit the information I need.
Here is the quote from Chrysler.
Dear Christopher:
Thank you for contacting the Chrysler Customer Assistance Center.
We are proud of our accomplishments and the excitement our products are generating. We are successful because we concentrate our resources in areas of new product development, engineering and safety.
The production number information you are seeking is unavailable, only specific VIN generated information is available from our center. General information on the subject matter may be available via the internet.
The Chrysler Group Historical Foundation has much information on our vehicles, as well as other historic information available.
For a fee, they will provide:
- Build records
- Service manuals for vehicles built from 1932 forward
- Copies of most owner's manuals
- Stock photos of most vehicles
- Much more
Send your request to:
Chrysler Antique/Historical Foundation
One Chrysler Drive East
CIMS 488-00-00
Auburn Hills, MI 48325-2778
You can also visit their web site at: http://www.chryslerheritage.com
Thanks again for your email.
Sincerely,
Tony
Customer Service Representative
Chrysler Customer Assistance Center
DRTC #1064
Keep us updated. Also what info would you need Vin correct?
Most likely, but right now I'm waiting for a response from the http://www.chryslerheritage.com place regarding what information we need to supply to get our data released, I'm sure it's going to cost money also. So once I figure all this out. I will update this thread or create a new one, so I can get 1 vin from every year/color/cab config and send it off.
Hopefully we won't have to do that and we can just pay a small fee and get the information released.
Maybe even get with Chrysler and make this club "Official"
DRTC #1064
Any updates?
2002 Flame Red RC R/T
272 RWHP 315 ft/lb TQ
218/226 Comp Cam, Stage 1 Ported EQ Heads, PRW 1.6 Roller Rockers, PIE Custom Tune, Full spintech exhaust with 3" side exit, 52mm Holley, Ported Kegger, Viper E-Fan, Powerdemon Trans, Hotchkis Springs, Leafs and Sway Bars, R/T 20's, Gen 3 viper seats, Custom "Rejected" State Inspection Sticker
Plenty More to come
No... I'm going to have to call them, unless someone else wants to. I'm at work.
Hello Christopher,
You will have to contact them directly through the archives by calling 313-252-2902.
Jim Worton
DRTC #1064
any updates?
2002 Flame Red RC R/T
272 RWHP 315 ft/lb TQ
218/226 Comp Cam, Stage 1 Ported EQ Heads, PRW 1.6 Roller Rockers, PIE Custom Tune, Full spintech exhaust with 3" side exit, 52mm Holley, Ported Kegger, Viper E-Fan, Powerdemon Trans, Hotchkis Springs, Leafs and Sway Bars, R/T 20's, Gen 3 viper seats, Custom "Rejected" State Inspection Sticker
Plenty More to come
bump...?
2002 Flame Red RC R/T
272 RWHP 315 ft/lb TQ
218/226 Comp Cam, Stage 1 Ported EQ Heads, PRW 1.6 Roller Rockers, PIE Custom Tune, Full spintech exhaust with 3" side exit, 52mm Holley, Ported Kegger, Viper E-Fan, Powerdemon Trans, Hotchkis Springs, Leafs and Sway Bars, R/T 20's, Gen 3 viper seats, Custom "Rejected" State Inspection Sticker
Plenty More to come
Hey User, did those guys ever get back to you?
2002 Flame Red RC R/T
272 RWHP 315 ft/lb TQ
218/226 Comp Cam, Stage 1 Ported EQ Heads, PRW 1.6 Roller Rockers, PIE Custom Tune, Full spintech exhaust with 3" side exit, 52mm Holley, Ported Kegger, Viper E-Fan, Powerdemon Trans, Hotchkis Springs, Leafs and Sway Bars, R/T 20's, Gen 3 viper seats, Custom "Rejected" State Inspection Sticker
Plenty More to come
Nope. It's hard for me to get in touch with people with the hours I work.
I'm going to be taking a vacation around Thanksgiving. I'm going put that on my list of shit to do.
DRTC #1064
Hi out there!
I have a 2001 Flame Red Dakota RT Molson Indy Pace Truck, with the factory roll bar. Does anyone know how many they made?
Cheers,
Craig, Vancouver, Canada
Got a pic?
2002 AB CC R/T (R.I.P)
11.52@116.61 w/1.67 60'.
2002 AB QC 4.7 4x4
www.schroermasonry.com
Facebook.com/SchroerMasonry
Here is a picture of the Molson, Vacouver Indy Pace Truck
I will try again to attach a picture, just not use to these types of sites
No, the one on craigslist, Vancouver was mine I had for sale, and sold it right away. The picture may not show it, but this was not a roll bar just added on, as I use to be a car salesman at Deer Lake Chysler back in 1999-2001 and we had a couple of these same trucks for sale with roll bars and decals on them for sale back then, "that came this was from the factory". When I went to the Molson ,Vacouver Indy back in 2001 they had about 30 of the trucks all lined up in a row, with checkered flag decals on them, and each truck had the drivers name ,and number on each truck, also. I have seen a couple of other ones up here over the years that still had the checkered flag decals on them, and one that was for sale a few months back. The only thing I can think of, is Chrysler, Canada must of had them specially made for the races, as they were also available in 1999, and 2000 also. I was just curious if anyone outside of Canada new about them, or how many they made. Plan on buying another one in the future with lower kilometers, as mine had over 240,000 k's on it.
There was one for sale a couple of months ago on Craigslist with only 70,000k's, but sold before I had a chance to see it for 8,500.
Cheers,
Craig.
Last edited by Matt03RT; 12-12-2012 at 06:03 AM.
03' Dakota R/T FR RC
03' Dakota Sport (Bunch of bolt-ons) SOLD
70' Charger 500 (SOLD sadly)
I emailed dodge last tuesday about my truck. They sent me an email last night confirming the question. They wouldnt give me the info on every color from that year. But they did give me the info I really wanted about my truck. Ill copy and paste the email later when im by a computer later. Im on my phone now. Basically what they said was
59 in Flame Red Dakota R/T pickup standard cab 4x2
265 Dakota R/T's in 2003. We can not provide any info on color/cab prod. Number. Thank you. Ill send the email anyway just so I can prove that I'm not making this up.
03' Dakota R/T FR RC
03' Dakota Sport (Bunch of bolt-ons) SOLD
70' Charger 500 (SOLD sadly)
Here you go............
Dear Matthew:
Thank you for your patience as we further researched into your inquiry.
As per your request, I have included our production numbers below:
59 in Flame Red of the 2003 DODGE DAKOTA P/U REGULAR CAB R/T 4X2.
265 is the total number for 2003 DODGE DAKOTA P/U REGULAR CAB R/T 4X2.
We are unable to provide all the colors and body styles of the R/T
Dakota as customer requested.
I hope this information further assists with your inquiry.
Thanks again for your email, Matthew.
Sincerely,
Jeff
Customer Service Representative
Dodge Customer Assistance Center
03' Dakota R/T FR RC
03' Dakota Sport (Bunch of bolt-ons) SOLD
70' Charger 500 (SOLD sadly)
Need his actual email address, so everyone that has a Dakota in the later years can email him their VIN and get the information.
DRTC #1064