+ Reply to Thread
Results 1 to 8 of 8

Thread: Finally Got on a 1/4 Mile

  1. #1

    Default Finally Got on a 1/4 Mile

    Finally took a trip up to Byron Dragway http://www.byrondragway.com/Home.html to get a baseline before I start throwin' things on the R/T.
    Practically stock except for a K&N FIPK,Cat Delete,Short belt(A/C Bypass), Lowered and M&H DR's.

    R/T- .468
    60'- 2.131
    1/8-9.779
    1/4-15.333
    mph-88.80

    That was the 2nd run outta 5 and hit the limiter from 1st to 2nd. Tried (again) to adjust the TV cable with no luck,called it a day and came home. Got under the hood and adjusted it again, took it out on a back road and Blamo! Hit it right on! Oh well had a good time runnin' the 2 good runs down the 1/4 mile.


  2. #2
    Senior Member

    Status
    Offline
    Join Date
    Jun 2008
    Location
    Virginia
    Posts
    2,529

    Default

    Looks like a damn good baseline. Get ready to spend a lot of money for basically not much of a gain!

  3. #3

    Default

    [QUOTE=Fltlander;66136]Finally took a trip up to Byron Dragway http://www.byrondragway.com/Home.html to get a baseline before I start throwin' things on the R/T.
    Practically stock except for a K&N FIPK,Cat Delete,Short belt(A/C Bypass), Lowered and M&H DR's.

    R/T- .468
    60'- 2.131
    1/8-9.779
    1/4-15.333
    mph-88.80

    Pretty decent for a CC Jeff, glad you got the TV cable figured out!


    99 BK RC R/T
    99 SY RC R/T
    98 IB RC R/T

  4. #4



    11.99 or BUST! 2015

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Ventura, CA
    Posts
    3,867

    Default

    Not bad at all for how stock it is
    What size are the rear tires? 28"
    12.195@106.09@Sacramento Raceway
    2001 Hotchkis TVS+ QA1 shocks, Gemtop tonneau, Caltracs,JM's Long Tube Headers,4.56's,M1-2BBL, Bogarts,Viper fan,58mm F&B TB,SCT,LM-2,Vortech V2,42# injectors, Labonte meth kit, Martin Saine trans w/ constant pressure valve body, Martin Sain bullet 3600 stall TC.

  5. #5

    Default

    Well I've got 275x50-17 M&H's on...if that tells you anything

  6. #6




    grapejuice1998's Avatar
    Send Lawyers Guns & Money

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Dallas, TX
    Posts
    9,735

    Default

    Quote Originally Posted by 2k1AmberR/T View Post
    Get ready to spend a lot of money for basically not much of a gain!
    Only if you don't know what you're doing.
    Alan Short
    D.R.T.C. #15


  7. #7

    Default

    Quote Originally Posted by 2k1AmberR/T View Post
    Looks like a damn good baseline. Get ready to spend a lot of money for basically not much of a gain!
    Well for bolt-ons for now you can only expect so much...SCT...FTW!!!!

  8. #8



    11.99 or BUST! 2015

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Ventura, CA
    Posts
    3,867

    Default

    Quote Originally Posted by Fltlander View Post
    Well I've got 275x50-17 M&H's on...if that tells you anything
    Just making sure you didn't have 26" slicks on there...then i'd be worried about your time.
    12.195@106.09@Sacramento Raceway
    2001 Hotchkis TVS+ QA1 shocks, Gemtop tonneau, Caltracs,JM's Long Tube Headers,4.56's,M1-2BBL, Bogarts,Viper fan,58mm F&B TB,SCT,LM-2,Vortech V2,42# injectors, Labonte meth kit, Martin Saine trans w/ constant pressure valve body, Martin Sain bullet 3600 stall TC.

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •