hey guys i specificly seeing someones engine bay that was all black with red accents and just wondering who it was so i can see some more pics..
or if you have some pics at your own post away!
thanks alot guys
hey guys i specificly seeing someones engine bay that was all black with red accents and just wondering who it was so i can see some more pics..
or if you have some pics at your own post away!
thanks alot guys
Pre M1...
Post M1...
If you haven't lived for something, you'll die for nothing.
nice!
how did you get that air filter on there..
what all does it consist of..
i wanna get rid of my k&n tube
I used red thru-out the truck to be consistent
Last edited by 03dakotar/t; 04-23-2009 at 03:27 PM. Reason: more red pics
85-3540 - 14" base plate - offset opening
66-1401 - 14" xtreme lid - black trim ring
66-1401XB - 14" xtreme lid - blue trim ring
66-1401XR - 14" xtreme lid - red trim ring
66-1401XP - 14" xtreme lid - steel trim ring
E-3735 - 14x2.5" filter
E-3742 - 14x2.81" filter
E-3737 - 14x3" filter
E-3750 - 14x4" filter
E-3760 - 14x5" filter
OEM hoods max out with the 2.81" filter. Aftermarket hoods such as the Moore Performance SRT-10, or Reflexxion Cowl Hood (must cut braces) can accomodate taller filters.
An S-Bolt must be manufactured to use these filters because of the offset plate.
The offset base plate is required to shift the filter forward so it doesn't hit the rear cowl.
thanks to sin city for the info
Built 3/31/98
Now supercharged
After more black powdercoated parts...
Before recent powdercoated parts...
12.10@106@Famoso Raceway
That is the one! I love it
How did you getthe red rt on the oil cap and stuff like. That
Bill H made them for me. He can be found on delphi
http://forums.delphiforums.com/dakot...s/?msg=51268.1
user - BH-R/T (BHnxRT)
Thanks
12.10@106@Famoso Raceway
FYI: You have to use the really short (under 3") filters if you are still using a stock hood. Anything else requires a taller cowl like the SRT/Reflexxion/etc.
SinCity R/T
01 SV CC R/T * 03 BK CC R/T * 03 BW RC R/T * 98 BK RC R/T * 99 DA CC R/T * 03 BW CC R/T
How much do the filters cost?
I have a stock hood but I am going to get a aftermarket one soon
So ill swap filters
360 ,52mm F&B, M1, EQ heads bronze valve liners, mpp valve train, KRC Custom Ground Cam, Crower 1.7's, PPH midlength, SCT Hemifever tuning, LM-2, 2 1/2" duals
EQ heads
Complete part out 99 Durango w/ 5.9
Here's mine
Sweet plug wires. Are those the custom length firecores? T.I.A.
If you haven't lived for something, you'll die for nothing.
Edd... Nice valve covers... can I have um?
98 da ccrt
95 rcsb 5.9/ax15
11mm Taylor Pros, I think they call them 509s. I had to make them up, they were (you)cut to length and came with one unfinished end. Looms and all were custom fabbed, by me. I used an old moroso kit, and did some slicing & dicing on them.
PS, all the accessory brackets are now wrinkle black too.
Last edited by Hugh Jassole; 02-12-2010 at 06:48 PM.
Last edited by Hugh Jassole; 02-12-2010 at 06:47 PM.