+ Reply to Thread
Results 1 to 3 of 3

Thread: Rocker for Edelbrock's

  1. #1

    Axiom's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Austin, TX
    Posts
    855

    Default Rocker for Edelbrock's

    I have a set of 1.6 non-adjustable rocks from Harland Sharp. I was originally going to install them on the stock Magnum heads but I'm going to be buying a set of Edelbrock's and would like to install them. Will they fit? From what I read I just need to use the studs that come with the Edelbrock heads?
    - Mark

    2001 Dakota R/T - HCI and a few other things.
    Broken again... Rebuild underway.

  2. #2
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Too close to DC
    Posts
    5,124

    Default

    No. The ones Edlebrock recommends are $275 from summit. You can probably sell the HS's and come out ahead.
    03 CC 4.7 NV3500

  3. #3


    OG DRTC

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Bellevue, NE
    Posts
    6,856

    Default

    You can not use the non-adjutable HS rockers on the eddy heads. Uses a different type of stud. Any SBC rocker will work on the Eddys.


+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •