Rear end whining for the last 50,000 miles when I bought it. Thinking of having it repaired.
Estimate of Cost? I'm sure I'm not a virgin. One of you pros will know.
Thanks a bunch folks.
Rear end whining for the last 50,000 miles when I bought it. Thinking of having it repaired.
Estimate of Cost? I'm sure I'm not a virgin. One of you pros will know.
Thanks a bunch folks.
You probably need a new ring and pinion gear set which will be between $400 and $500 plus labor to remove and replace.
For the whole deal you would be looking at $1000.
Edelbrock Magnum heads, Harland-Sharp 1:6 RR, Jomar Performance Ultra-Lite Stud Girdle, SoutheastPerformance Sheet Metal Valve Covers, Custom Hyd Roller from Reed Cams, Mopar M-1 2 Brl Intake, Hughes Stage 1 TB, JBA SS Headers, Jacobs Electronics Pro Street Ignition System and Wires, MBRP 'Cuda Style Exhaust, Western Chassis 2" drop front and rear, Edelbrock IAS Shocks, Terry DeLong Pro-Glass Shaker Hood
If the gears look decent and brgs. ok , these trucks come from factory with the pinion too deep by .003 to .004 majority of the gear sets will set up with .030 shim and .006- .008 backlash. If gears and case are true, some aftermarket gear sets have issues getting decent pattern. this is a starting point/t smile:
Last edited by packard1; 02-15-2023 at 02:38 AM.