I removed the newer style decal and put the correct DODGE decal on the tailgate
I removed the newer style decal and put the correct DODGE decal on the tailgate
I flushed my heater core back and forth with garden hose until the water came out clean but the heat is still not like it should be. It's 40f here now and it warms up after driving for a little while but not like it should.
Maybe the stupid control knob cable isn't working 100%??
Is there a heater control valve on thse years? I can't find one
after driving the truck for a while after i think the heater is working better.
were a ton of little leaks all over, hoses, clamps, "safety" radiator cap.
i think after today i will get all the tiny leaks stopped.
it doesn't want to pull from the reservoir, probably because of the pressure leaks
Last edited by johnnyb; 11-26-2022 at 07:00 PM.
This upper radiator hard plastic garbage exploded 98 bucks for upper rad full piece
I thought it was the hose leaking at the clamp but the plastic was cracked. Then it exploded off
Took off the k&n I'm not really a fan of these wet filters Noone ever does maintenance on them. And it was also ramming into that cable I think is something to do with the cruise control
Truck looks good were did you get the stickers
My truck have red decals and it’s a 2000 I waiting on a new sticker to say midnight express for back tailgate
Yah I got them at graphics express
anything i can do about this bumper gap? why is it like this? if the bumper was taken off and put back on is there some adjustment i can do?
I fixed the overflow tank the bend at the bottom where the hose connects was crammed with crud
Last edited by johnnyb; 12-01-2022 at 05:10 PM.
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
You can get it closer but it will still have a large gap. IIRC, the bottom of the grill in relation to the bumper prevents getting a tighter gap.
"Excuse me if I have some place in my mind, where I go time to time"
i put a o2 bung back in the exhaust for the secondary o2. i was charging and doing updates on my tuning laptop, and the code cleared itself before i could clear it
the o2 code came back, now its giving out of range, really lame that HPTUNERs can't turn off these codes
i have a spark plug anti fouler i'm going to try that trick later today
O2 code came back on lol.
Going to try the spark plug defouler trick. I put the o2 back in well see what happens
It says you can in the software but it still comes in when I have it disabled
Maybe a model year thing? My 99 has had the rear 02 zip tied to the frame for many years now, never a code.
"Excuse me if I have some place in my mind, where I go time to time"
After driving a couple days with the anti fouler the code went off by itself again.
Hopefully it stays
the light came back on a couple drives later.
maybe i can check and see if there is a hptuners update that has been JTEC+ support
Light turned off again and has stayed off since dunno maybe it will go back and forth