+ Reply to Thread
Results 1 to 8 of 8

Thread: Brake/clutch pedal fitment/interchange.

  1. #1
    Junior Member

    Status
    Offline
    Join Date
    May 2020
    Location
    Syracuse, NY
    Posts
    20

    Default Brake/clutch pedal fitment/interchange.

    At a junkyard and looking for the clutch brake pedal bracket assembly for my '99. Found 2 manuals dakotas a '02 and an '03. Will the clutch pedal bracket fit in my '99?

    Thanks!

  2. #2
    Junior Member

    Status
    Offline
    Join Date
    May 2020
    Location
    Syracuse, NY
    Posts
    20

    Default

    Well I pulled it....what a witch. Hope it works!

  3. #3
    Junior Member

    Status
    Offline
    Join Date
    May 2020
    Location
    Syracuse, NY
    Posts
    20

    Default

    20211229_133319.jpg

    Do these look correct?

  4. #4
    niebs's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    North DE
    Posts
    1,761

    Default

    I believe they are all the same. Other than the main rod.

  5. #5
    Junior Member

    Status
    Offline
    Join Date
    May 2020
    Location
    Syracuse, NY
    Posts
    20

    Default

    Quote Originally Posted by niebs View Post
    I believe they are all the same. Other than the main rod.
    Main rod? But shouldn't be a problem bolting into my 99? Got a few more parts to come up with. Hopefully by Spring I can start tearing it apart for the swap.

  6. #6

    Default

    you don't need the bracket unless the existing one is broken or missing. They are the same for manual and auto. You only need to swap the shaft and install the pedal.
    1941 Dodge 1/2 ton, 493 twin turbo, EFI, 727, 4 wheel disc brakes, custom triangulated 4 link, DANA 60, Gleason Torsen diff,

    2002 Dakota R/T RC, PX8, PPH Headers, K&N FIPK, Hotchkis TVS, 20" R/T chrome rims, BFG G-Force T/A KDW 275/35 ZR20 tires, Kenwood head unit, Kenwood speakers, RF amp, 8" RF Punch Z subs

    1998 Dakota RC daily driver 5.9L, AX-15 5 speed, Hooker long tube headers, FRP tune

  7. #7

    Default

    Flipped you pic
    Attached Images Attached Images

  8. #8

    Default

    Quote Originally Posted by Stormbride1 View Post
    Well I pulled it....what a witch. Hope it works!
    takes under 5 minutes to pull the pedal & shaft...
    1941 Dodge 1/2 ton, 493 twin turbo, EFI, 727, 4 wheel disc brakes, custom triangulated 4 link, DANA 60, Gleason Torsen diff,

    2002 Dakota R/T RC, PX8, PPH Headers, K&N FIPK, Hotchkis TVS, 20" R/T chrome rims, BFG G-Force T/A KDW 275/35 ZR20 tires, Kenwood head unit, Kenwood speakers, RF amp, 8" RF Punch Z subs

    1998 Dakota RC daily driver 5.9L, AX-15 5 speed, Hooker long tube headers, FRP tune

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •