Well I put the battery in it, and it fired right up
https://youtu.be/cwYEm8q96cE
Well I put the battery in it, and it fired right up
https://youtu.be/cwYEm8q96cE
Sounds good Ernie. How long since you've had it running?
408, HiPoTek, FRP Tuning, Martin Saine 46re12.33 @ 1102018 Renegade Raceway Summit Series Sportsman Champion
Probably since the last time I saw you at the track Mike! How are you doing ?
Thanks Richard, hell yea it feels good, we are empty nesters so we are always traveling, between doing stuff on the Jeep, my grandson and casinos I have not had time to work on this thing, what I need to do is get the dam SRT10 done, it’s been in the shop for about 4 years now
44862836-AEA0-4C33-BB75-8896739E27BF.jpg
It always amazes me how easy these things start. After sitting or a complete engine build. Turn the key, let the fuel pump charge the system and bang, it starts. No screwing around with gas down the carb, or no burnt arm hair and eye brows.
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
Straight up, this thing fires right up !
This post could've easily been an April fools joke but good on you for posting video proof!
I was amazed how fast mine fired up too. 1st attempt starting up the 408 rebuild, it came to life without any hesitation actually took me by surprise
1999 R/T CC Flame Red (what's left of the paint)
//SHAKER// 408 Forged // TKO600 5spd // Spintech-Mids // HiPoTek 106 LOPEYCAM // FRP Tuned //
I pulled it out today, and it fired right up, washed it and did a smoky burnout, on dry pavement, cause you know Line Loc! lol filled the block up with smoke
A293B8CD-E0F3-4544-9D41-8E7104E390A8.jpg
Mmmm...line loc is fun
1999 R/T CC Flame Red (what's left of the paint)
//SHAKER// 408 Forged // TKO600 5spd // Spintech-Mids // HiPoTek 106 LOPEYCAM // FRP Tuned //
Little burn out after I dried it up
https://youtube.com/shorts/mteB6QdyeQk?feature=share
NOICE!
1999 R/T CC Flame Red (what's left of the paint)
//SHAKER// 408 Forged // TKO600 5spd // Spintech-Mids // HiPoTek 106 LOPEYCAM // FRP Tuned //
I keep getting a code for injector 3 & 6 , open circuit, might order some FOMOCO 24lbs
Or Accel , if anyone has any leads
Last edited by blackknight; 04-10-2021 at 06:21 PM.
Now that I got this thing up and running, I’ll be pulling the flip up screen out and installing a double din screen Pioneer, and I’ve got to get these Spintechs on, question is X pipe or not,
26084A04-1555-4F4C-90E6-E902D1C3A422.jpg
83099E70-62AC-4733-950C-F6A5C8F333AB.jpg
I picked up the tabs today after 4 years I guess it’s getting pretty serious
EDAEEE88-E75F-4736-B654-A7FC2FDAC101.jpg
Sounds like you are on the right path to bring her back to the glory! Way to go
It’s drivable now, I wanted to pick up some 110 this week
1941 Dodge 1/2 ton, 493 twin turbo, EFI, 727, 4 wheel disc brakes, custom triangulated 4 link, DANA 60, Gleason Torsen diff,
2002 Dakota R/T RC, PX8, PPH Headers, K&N FIPK, Hotchkis TVS, 20" R/T chrome rims, BFG G-Force T/A KDW 275/35 ZR20 tires, Kenwood head unit, Kenwood speakers, RF amp, 8" RF Punch Z subs
1998 Dakota RC daily driver 5.9L, AX-15 5 speed, Hooker long tube headers, FRP tune