-
Senior Member
Status
- Offline
Need help in p/s pressure and return hose choices for 99 w/ HD/ Cooling
I'm trying to find the correct hoses for my 99 R/T with the factory P/S cooler. I haven't looked very closely under the truck to get a better look at the hoses. The aftermarket pressure hoses I'm seeing online look to be all correct. The return hoses are the problem. On mine there is a small crimped section that fastens to the back of the pump reservoir and is secured by a screw clamp. I was going to buy this as the pressure hose. https://www.rockauto.com/info/50/80306E__ra_p.jpg
The return hoses listed do not match what mine looks like. I see a regular clamped hose on mine going from the cooler to the rack. Then this one going from the cooler to the back of the reservoir with the short crimped section. When I cross reference the Mopar part number it comes up as these. https://www.rockauto.com/info/64/352...OP_A__ra_p.jpg
Is there an important reason for that short crimped section? Do I need to get the original Mopar one? It's $140 or $80 for this nos below.
https://www.ebay.com/itm/Dodge-Dakot...wAAOxygj5Senqr
-
Accumulating parts...
Status
- Offline
There are three different return hoses. I’m not sure if my ‘01 is any different then your ‘99.
If you don’t have the p/s cooler, there is a longer hose, if equipped with the cooler, there is a short hose from the reservoir to the cooler, than the cooler to rack.
I have a couple photos on my phone, if you need more I can text them to you tonight.
I’ll shoot you a message with my #
I recently removed my cooler and installed the longer style hose. I have all the parts available to measure or take photos for ya.
Posting Permissions
- You may post new threads
- You may post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules