+ Reply to Thread
Results 1 to 20 of 20

Thread: Remanufactured Transmissions

  1. #1

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default Remanufactured Transmissions

    Hope you and your families are doing well.

    I am looking to replace my worn out 46re on my 99 RT. It has 130k. I have had my RT for 5+ years now and I'm the third owner.

    Looking to replace my trans & converter with a stock build, remanufactured unit.

    Asking if any member here knows of reputable trans reman companies I can order from and have shipped to my home.

    I scoured the internet and found the following if anyone has anything good, bad or indifferent to say about these.

    Thanks.
    Terry

    Monster Transmissions https://www.monstertransmission.com/

    Best Buy Transmission
    https://www.bestbuytransmission.com/46re-transmission

    Summit
    https://www.summitracing.com/parts/v...e/model/dakota

    Jegs
    https://www.jegs.com/p/ATK-Engines/A...submodel=R%2FT

    Rock Auto
    https://www.rockauto.com/en/catalog/...+assembly,8556

  2. #2
    Senior Member

    Status
    Offline
    Join Date
    Aug 2018
    Location
    Wheelersburg
    Posts
    122

    Default

    https://www.google.com/amp/s/www.tra...9.html%3famp=1

    This is who I went through. 30,000 miles and plenty of romping later and their stage 1 46re is doing just fine.
    2003 Dakota R/T CC Flame Red. Bolt ons, Built Trans.
    Dynotune Nitrous Wet system, 100 shot, FRP tuned.

    Acts 2:38

  3. #3



    99dart's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Washington...the hot side!
    Posts
    3,772

    Default

    For quit awhile Ma Mopar had an overstock of brand new 46re's that went for a really good price. I want to say a grand, brand new from dealer. Maybe a quick search here and a few phone calls to Dodge are in order.
    99 DA CC R/T
    13.97@100 w/modded kegger & ported TB
    12.96 @103 new 365 C.I (guessatune
    http://imgur.com/a/lOVuZ

  4. #4



    99dart's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Washington...the hot side!
    Posts
    3,772

    Default

    For quit awhile Ma Mopar had an overstock of brand new 46re's that went for a really good price. I want to say a grand, brand new from dealer. Maybe a quick search here and a few phone calls to Dodge are in order.

    Here it is... http://www.dakotart.com/forum/showth...000-from-Dodge
    99 DA CC R/T
    13.97@100 w/modded kegger & ported TB
    12.96 @103 new 365 C.I (guessatune
    http://imgur.com/a/lOVuZ

  5. #5

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Thanks for the info. I tried several online Mopar parts dealers and none in stock (discontinued).

  6. #6

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Quote Originally Posted by SPelf View Post
    https://www.google.com/amp/s/www.tra...9.html%3famp=1

    This is who I went through. 30,000 miles and plenty of romping later and their stage 1 46re is doing just fine.
    Thanks for the link. I will add it to my list.

    Good to hear its holding up well after 30k

  7. #7
    Senior Member

    Status
    Offline
    Join Date
    Nov 2014
    Location
    Crestview, Florida
    Posts
    111

    Default

    If you want a good trans talk to Martin Saine. Stock these transmissions have terrible valve bodys and if your going with another one I would advise doing a VB upgrade. Nothing crazy but MS can hook you up and at a pretty go price.
    99 RT Fully built 365


  8. #8

    KicknAsphlt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Denver, CO
    Posts
    1,801

    Default

    Find a local trans shop that specializes in Older/Muscle (and preferably Mopar) transmissions. My stock tranny shit itself around the 50k mark and I had it rebuilt by a local place in fresno (the guy's dad helped develop the B&M kits for chevy transmissions) and I've got over 100k on that rebuild without any issues.
    - Justin


    '00 BW CC R/T
    '91 Graphite Turbo Targa Supra

    F-Quick Myspace Facebook

  9. #9

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Quote Originally Posted by 99lowdakota View Post
    If you want a good trans talk to Martin Saine. Stock these transmissions have terrible valve bodys and if your going with another one I would advise doing a VB upgrade. Nothing crazy but MS can hook you up and at a pretty go price.
    I have heard MSaine makes great trans parts. I will keep this in mind.

  10. #10
    Senior Member

    Status
    Offline
    Join Date
    Nov 2014
    Location
    Crestview, Florida
    Posts
    111

    Default

    Quote Originally Posted by TC-RT View Post
    I have heard MSaine makes great trans parts. I will keep this in mind.
    I would give him a call before anyone but thats my Opinion.
    99 RT Fully built 365


  11. #11

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Thanks to everyone for your feedback.

    I got in contact with Martin Saine who by the way seems to be a very stand up guy. He answered all my questions (and there were alot) I now understand why he has been in business for so long.

    Anyway, he will be building my trans for me as soon as I pay him this week.

    I cannot wait to drive my RT without tranny issues. Should be like a new truck again.

    Thanks again to everyone for your input.

    I will try and keep this post updated. I am slowly in the process of removing the old trans. I ordered a trans jack to be safe and will have the RT on wheel cribs along with jack stands for extra insurance. I have a nice level concrete pad on the side of my house thankfully as my driveway slopes down.

    Updates will come, but will be slow as I am not going rush and screw something up.

    Terry (TC)

    Terry

  12. #12
    Senior Member

    Status
    Offline
    Join Date
    Nov 2014
    Location
    Crestview, Florida
    Posts
    111

    Default

    Quote Originally Posted by TC-RT View Post
    Thanks to everyone for your feedback.

    I got in contact with Martin Saine who by the way seems to be a very stand up guy. He answered all my questions (and there were alot) I now understand why he has been in business for so long.

    Anyway, he will be building my trans for me as soon as I pay him this week.

    I cannot wait to drive my RT without tranny issues. Should be like a new truck again.

    Thanks again to everyone for your input.

    I will try and keep this post updated. I am slowly in the process of removing the old trans. I ordered a trans jack to be safe and will have the RT on wheel cribs along with jack stands for extra insurance. I have a nice level concrete pad on the side of my house thankfully as my driveway slopes down.

    Updates will come, but will be slow as I am not going rush and screw something up.

    Terry (TC)

    Terry
    Good to hear. And its always good to hear the people I recommend stay true to being stand up people. Thank you for the feed back and I hope to be updated with great burnout videos when its all done
    99 RT Fully built 365


  13. #13

    Default

    Where is Martin at again? Are you shipping the Tranny?
    Mike Williams
    #001

    98 DA RC GrapeJuice
    99 BLK CC (Buy Back)
    00 BLK RC ProCharged -Hotchkis - on and on (Sold)
    01 AF CC (Leased - Turned in)

  14. #14

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Quote Originally Posted by evilrt View Post
    Where is Martin at again? Are you shipping the Tranny?
    He is in Riverside, California.

    He is building the trans, shipping it to me, then I will return mine as a core.

  15. #15

    Default

    Quote Originally Posted by TC-RT View Post
    He is in Riverside, California.

    He is building the trans, shipping it to me, then I will return mine as a core.
    He has a great rep and is a stand-up guy. Check for a discount for forum members. Expect to pay at least $600 over advertised cost for shipping tranny to you and core to him. Still comes in cheaper than other tranny houses for what he installs. It's unfortunate we live on opposite coasts.

  16. #16

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Quote Originally Posted by arro222 View Post
    He has a great rep and is a stand-up guy. Check for a discount for forum members. Expect to pay at least $600 over advertised cost for shipping tranny to you and core to him. Still comes in cheaper than other tranny houses for what he installs. It's unfortunate we live on opposite coasts.
    You hit the nail on the head for shipping. From CA to NJ and back to CA I expected the shipping costs to be about that. You figure something that weighs about 200 lbs and change isn't going to be terribly inexpensive shipping wise.

  17. #17

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Step 1 Complete: The RT is airborne.

    20200730_184846.jpg

  18. #18
    Senior Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Los Angeles
    Posts
    400

    Default

    How much did you end up paying for the trans and for the shipping?

    I need a trans bad, live not far from him. Theres a place in bakersfield that can rebuild for half the cost, seems to have decent reviews, but Martin has the rep.

  19. #19

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Quote Originally Posted by spawn_x View Post
    How much did you end up paying for the trans and for the shipping?

    I need a trans bad, live not far from him. Theres a place in bakersfield that can rebuild for half the cost, seems to have decent reviews, but Martin has the rep.
    If your close, may be worth the drive to pick it up and save on shipping if he has that option available; he could answer that question though. My shipping was roughly $600; however I'm on the east coast in New Jersey and its residential delivery to my home which costs a little more.

    S/S 700 Trans with 28S Performance Converter was $2500 + $500 core. I think its a very fair price in my opinion as some stock build off the shelf trans from major parts retailers hover around 2k. The trans and converter I am getting is definitely not a stock build. I figure I want to do this once and be done.

    I did ask Martin directly if I could post the price on the forum here and he was fine with that.

    I would suggest contacting him directly. Very friendly, stand up guy that will answer your questions and give you the details.

    Martin Saine contact info:
    951-907-0434
    msaine1213@aol.com

    Give him a call or shoot him an email.

    Best of luck in your trans search.

    TC

  20. #20

    TC-RT's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Collingswood, NJ
    Posts
    374

    Default

    Quote Originally Posted by TC-RT View Post
    Step 1 Complete: The RT is airborne.

    20200730_184846.jpg
    Step 2:

    - Drain Trans
    - Remove Driveshaft
    - Remove Dipstick
    - Remove Crank Position Sensor
    - Remove Nut and Bolt on Starter; Disconnect Electrical Connector; Snap off copper stud on Starter; Starter falls on my forehead.

    Wife says I'm hardheaded,; can't believe it didn't split my head open. I will say it rung my bell.

    After the storm rolls over here on tbe east coast, I will tackle removing the exhaust.

    TC

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •