I gots to have mo'par-ts!
Status
Offline
Originally Posted by
99dart
Just so you have something to compare with. These are my cam specs for my .030 over 360, 10.8 to 1 compression, SRP forged flat tops w/ -5cc valve reliefs. I am running 1.7 rockers for a total of .571/.578 lift (or something real close to that)
Thanks, for sharing your cam card 99dart. Looks like it has a good amount of lift especially if you're running the 1.7s. I'll likely get something close to that lift but with a little more duration. HIPOTEK aka Richard recommended .520"-.550" and a 236 intake duration. I'm using 1.6 rockers.
1999 R/T CC Flame Red (what's left of the paint)
//SHAKER// 408 Forged // TKO600 5spd // Spintech-Mids // HiPoTek 106 LOPEYCAM // FRP Tuned //