Believe he said the same thing on two different transmissions. Would tend to think, a cable or linkage issue. Damaged wiring/ connector possible.
Believe he said the same thing on two different transmissions. Would tend to think, a cable or linkage issue. Damaged wiring/ connector possible.
Mike Williams
#001
98 DA RC GrapeJuice
99 BLK CC (Buy Back)
00 BLK RC ProCharged -Hotchkis - on and on (Sold)
01 AF CC (Leased - Turned in)
sorry i was on my phone must have deleted it.
https://www.youtube.com/watch?v=3jJBQ5HaE0o
gonna try disconnect and see if it moves freely.
Otherwise, the problem may be within the pan connecting to the valve body--Would this have been replaced/addressed on a rebuild?
It’s hard to tell but I didn’t think I saw the tv bracket. The bigger bracket that has to be installed first is for your shifter position and the smaller bracket that goes on is for the tv
10.25 @131 SBE 5.9 360 turbo!!!
Check me out on YouTube - ThatTurboDakota
I keep watching the video. It really looks like your missing the tv bracket and the tv cable is bolted on the selector bracket
Last edited by Cregger; 02-21-2020 at 03:22 PM.
10.25 @131 SBE 5.9 360 turbo!!!
Check me out on YouTube - ThatTurboDakota
10.25 @131 SBE 5.9 360 turbo!!!
Check me out on YouTube - ThatTurboDakota
I think Cregger is onto something. I thought the TV bracket looked a little large, and after watching the vid again, it looks like there is nothing hooked up to the TV shaft. But I wondered how is he shifting if the shift linkage isn't hooked up properly? I didn't think it was possible to hook up both the TV cable and shift lever to the same bracket. But again, I don't see any bracket or cable hooked up to the TV shaft. Do you have a better pic of that area?I keep watch the video. It really looks like your missing the tv bracket and the tv cable is bolted on the selector bracket
I can do it now. Im off today.
in that pic where the gear selector lever and the tv lever connect are those two seperate levers that move independently of each other?
Last edited by robroy82; 02-21-2020 at 03:05 PM.
"I didn't think it was possible to hook up both the TV cable and shift lever to the same bracket"
they are most def connected to the same bracket. But in that pic in the posts above it looks like that's the normal way?
Google search 46re tv adjustment and look at the images. You’ll see
10.25 @131 SBE 5.9 360 turbo!!!
Check me out on YouTube - ThatTurboDakota
Dakotarttranny.jpg
Is this metel tip supposed to be the TV lever...?
My bracket looks wrong i think where its one solid piece where both my drive selection and tv cable are connected
found this on a website cause i def don't have this going on....
transshiftlever.jpg
Awesome! Find yourself a local trans shop. Maybe they’ll have something laying around. I don’t think your selector bracket is incorrect I just think they modified it to put the TV cable on it so all you really need is the TV cable bracket
10.25 @131 SBE 5.9 360 turbo!!!
Check me out on YouTube - ThatTurboDakota
already went to my local junk yard and got the tv bracket off a tranny lying on the ground...
btw why would some one do this?
Maybe the person that took it apart, wasn't who reassembled?
Maybe it had been apart for awhile & they couldn't remember how to reassemble?
Maybe it was a dumb _uck?
All I've got.
"Excuse me if I have some place in my mind, where I go time to time"
I remember my friend had an Iroc Z Camaro , he went to the track and disconnected the Tv cable so the trans wouldn’t shift out, forgot about it and drove home (about 2 miles) and it burned the trans out cause the Tv cable was off, could this also happen in the 46re ?
well my cable hasn’t been connected in years and it took that long to burn up a 200,000 mile tranny...
Glad to see this coming to a resolution.
Mike Williams
#001
98 DA RC GrapeJuice
99 BLK CC (Buy Back)
00 BLK RC ProCharged -Hotchkis - on and on (Sold)
01 AF CC (Leased - Turned in)
Jim
RaceMagnum
just had to come back here and thank you guys again for this.