I recently installed a back up camera and discovered my reverse lights did not work causing the camera not to work.

Decided to take a look at the neutral/reverse light switch on the drivers side of the tranny.

I discovered that 2 out of the 3 wires were broken off the connector at the connector so I had no room to splice new wire (image below).

I disassembled the connector and rebuilt it as I could not find one in stock at my local parts stores.

So far it works and I replaced the switch since it has a small leak around the gasket which probably ate through the wiring over many years.

20190917_100136.jpg

20190917_102601.jpg

20190917_112054.jpg