I need to get my balancer off my 5.9 ,What tool will work best . I thought i had what i needed ,but noooo just my luck . It needs to be some kinda jaw puller that clamps on to the dampner not bolt on.
I need to get my balancer off my 5.9 ,What tool will work best . I thought i had what i needed ,but noooo just my luck . It needs to be some kinda jaw puller that clamps on to the dampner not bolt on.
This is what I use. I would guess one of the parts stores would have one similar in there rent-a-tool program.
https://www.matcotools.com/catalog/p...pulley-puller/
Last edited by dragbaron; 03-31-2019 at 09:31 PM.
'99 R/T- Red Reg/cab (Procharged garage Queen!)
'99 R/T- Deep Amethyst Reg/Cab(the daily driver)
'00 R/T- Blue Ext/cab(The newest arrival)
'04 SRT4- stage 2, bigger turbo, intercooler, and exhaust
'91 Dakota- reg/cab short bed(5.2 magnum swap in progress)
'87 Shelby Charger(will get to it eventually)
'76 W100- 400/auto(it was given to me)
'71 D100- short bed(will be getting magnum/OD auto swap)
'68 A100 pickup- 360/auto
Thanks that's the one i've been looking at/trying to find .
You can rent this one for free at autozone (deposit from credit card), or buy it from amazon for $50
https://m.autozone.com/test-scan-and...91370_0_0?aqs=
12.10@106@Famoso Raceway
And the tool to put it back on...
https://m.autozone.com/test-scan-and...91373_0_0?aqs=
12.10@106@Famoso Raceway