I've got the 03-04 brake upgrade spindles now. I got one with the bearing off and the other the bearing is stuck on there. I know last time I changed the stock one on my 99 I was able to pull it with a 3 jaw puller. It won't do anything on this 03-04 bearing. All it did was just make a dent in the center of the hub mount. I tried spray it with penetrating oil overnight but still no luck. The hub moves around the bearing, so the bearing is stuck on there. Any other suggestions? I got them off of ebay so I didn't know it was going to have the bearing on one. I guess the salvage yard got one off easy and then couldn't get the other one off, since the hub nut is loose. I'm guessing they attempted to remove it but couldn't.