-
Senior Member
Status
- Offline
Ignition switch Replacement
Got my truck back after it was stolen. The ignition switch was popped out with a flat head screwdriver so I’m guessing I should replace both peace’s. Not sure what the names of the parts are but from what I googled it looks like a key cylinder and a ignition switch?
My original key still works fine with the original ignition key cylinder so I’m hoping it’s reusable just to keep the original keys.
I guess my main question is do I half to do any programming or key programming?
Thanks guys
Last edited by Goober rt; 12-16-2018 at 06:54 AM.
-
Glad you got your truck back ,If everything goes back together keep the cylinder lock or you will need 2 keys , but it depends on the condition of the cylinder lock , as far as programming I have 3 dakotas
2000 rt 98 rt and 2000 4x4 and none has programmable keys
-
Senior Member
Status
- Offline
I have a 01 and I replaced the ign switch with box store brand. No programming needed.
-
Senior Member
Status
- Offline
thanks for the info guys!
I’m taking it apart today and just gonna put all new parts and just deal with having two keys.
Posting Permissions
- You may post new threads
- You may post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules