Not my Dakota, but I redid my valve covers on my 10, no mo Red ! https://imgur.com/a/a8F3KTT
Not my Dakota, but I redid my valve covers on my 10, no mo Red ! https://imgur.com/a/a8F3KTT
Was suppose to have your pic. but i guess i dont know what im doing haha
Looks good tho
Ever since photobucket crashed I havnt been able to figure out how to post pics, going in to a link kind of sucks sometimes
Just attach them to the forum.
Click "Go advanced" > click the paper clip and upload your photo.
Last edited by Adobedude; 11-19-2018 at 01:17 PM.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Did that work ? Otherwise here’s the link to the intake part
https://imgur.com/a/H6wm2ro
Just stripped them with aircraft remover , hit them with scotch Brite, and powder coated them , the guys did 3-4 coats of gloss black and 3-4 coats of clear, then I block sanded the letters, took about a week but well worth it
Thanks for the info. I might just use a hi-temp paint.