+ Reply to Thread
Results 1 to 3 of 3

Thread: Think I cooked the trans...which scanner reads the TCM?

  1. #1

    Default Think I cooked the trans...which scanner reads the TCM?

    Well - technically it was my son, but now the "rebuilt" 46 RE is slipping. My Konnwei scanner doesn't see the TCM. I see two codes I can't read. I assume those are the trans codes. Which scanner will read the TCM on the Dakota? Mine is 2001 R/T.
    2001 Dakota R/T, Standard Cab...the Rat Roaster!

  2. #2
    blackknight's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2009
    Location
    wapato, wa
    Posts
    6,913

    Default

    Have you checked the oil level ? Running while in neutral ?

  3. #3

    Default

    Fluid level is fine. It's not burnt or stinky. Thinking one of the solenoids is bad - not sure they were replaced with the rebuild.
    2001 Dakota R/T, Standard Cab...the Rat Roaster!

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •