Looking to trade my Harland Sharp Non-adjustable 1.7 for the same non-adjustable 1.6 roller rockers.
Looking to trade my Harland Sharp Non-adjustable 1.7 for the same non-adjustable 1.6 roller rockers.
2003 CC
360 Swapped, FRP Tuned, 2.02 EQ Heads, 210XP cam, HS 1.7 RR's, Fastman 52mm TB, Mopar 2bbl M1, Mopar/PPH Headers, 2.5" True Dual, X-Pipe, Hooker AeroChambers, Hi Flow Cats, MSD Coil, Cloyes Double Roller Chain, JGC fan, 180F T-stat, Mopar Valve covers, K&N FIPK, PATC 2800 Stall, Martin Saine VB, Mildly built trans, 4.10 gears.
249 HP/322 TQ FRP Tune (Old build. New build TBD)
12.35 @ 109 (150 Shot)
#1222
r/DodgeDakota
Care to share the reason for this?
DRTC #1176
2000 Bright White CC (1/553)
Dyno'ed 07/05/13 (126,000 Miles) 230 Hp / 308 Tq
14.6 @ 93 mph (2.18 60 ft.), 4130 lbs.(1/2 tank gas)
Truck Pictures --> http://smg.photobucket.com/albums/v9...Clough/Dakota/
1985 Kawasaki GPz550
2003 SV650S (Race)
1973 W100 Powerwagon
Mater: I don’t need to know where I’m goin’, I just need to know where I been!
2003 CC
360 Swapped, FRP Tuned, 2.02 EQ Heads, 210XP cam, HS 1.7 RR's, Fastman 52mm TB, Mopar 2bbl M1, Mopar/PPH Headers, 2.5" True Dual, X-Pipe, Hooker AeroChambers, Hi Flow Cats, MSD Coil, Cloyes Double Roller Chain, JGC fan, 180F T-stat, Mopar Valve covers, K&N FIPK, PATC 2800 Stall, Martin Saine VB, Mildly built trans, 4.10 gears.
249 HP/322 TQ FRP Tune (Old build. New build TBD)
12.35 @ 109 (150 Shot)
#1222
r/DodgeDakota
Changing the rockers are easier than the cam. This could be the makings for an interesting “camshaft lift, lobe separation angle, rocker arm choice” explanation learning thread.
Last edited by Corey; 10-12-2018 at 05:07 PM.
DRTC #1176
2000 Bright White CC (1/553)
Dyno'ed 07/05/13 (126,000 Miles) 230 Hp / 308 Tq
14.6 @ 93 mph (2.18 60 ft.), 4130 lbs.(1/2 tank gas)
Truck Pictures --> http://smg.photobucket.com/albums/v9...Clough/Dakota/
1985 Kawasaki GPz550
2003 SV650S (Race)
1973 W100 Powerwagon
Mater: I don’t need to know where I’m goin’, I just need to know where I been!
Couple things can cause valve springs to break, how old are they? what is coil bind" what is your lift at valve? rpm range you turn the engine.
Also it is impossible to produce perfect springs every time, sometimes you just get a bad batch, valve spring companies do not like to admit this.
This signature has been deleted thanks to photobucket!
DRTC #1176
2000 Bright White CC (1/553)
Dyno'ed 07/05/13 (126,000 Miles) 230 Hp / 308 Tq
14.6 @ 93 mph (2.18 60 ft.), 4130 lbs.(1/2 tank gas)
Truck Pictures --> http://smg.photobucket.com/albums/v9...Clough/Dakota/
1985 Kawasaki GPz550
2003 SV650S (Race)
1973 W100 Powerwagon
Mater: I don’t need to know where I’m goin’, I just need to know where I been!
11.27 @ 118.232017 NM Mopar Challenge Series Champion