+ Reply to Thread
Results 1 to 4 of 4

Thread: Power steering leak?

  1. #1

    Default Power steering leak?

    So i have a bit of a situation that is confusing to no end. I had to replace the power steering pump and rack and pinion. While I was in there i replaced all the lines that go from the lines from the pump to the rack and pinion. Now it loses power steering fluid but its not dripping on the ground anywhere. I have no idea what else to look at.

  2. #2
    9t9-5.2's Avatar
    Home School Valedictorian

    Status
    Offline
    Join Date
    Jun 2014
    Location
    Central Iowa
    Posts
    1,307

    Default

    Did you bleed it properly, is it purging air?

    "Excuse me if I have some place in my mind, where I go time to time"

  3. #3

    Default

    Had it flushed at the shop that did the alignment

  4. #4

    Corey's Avatar
    GPz550 Addict

    Status
    Offline
    Join Date
    Sep 2009
    Location
    San Lorenzo, CA
    Posts
    1,926

    Default

    Sounds like not enough fluid added after the "flush". No where else for it to go, if there isn't a leak anywhere.
    DRTC #1176

    2000 Bright White CC (1/553)
    Dyno'ed 07/05/13 (126,000 Miles) 230 Hp / 308 Tq
    14.6 @ 93 mph (2.18 60 ft.), 4130 lbs.(1/2 tank gas)
    Truck Pictures --> http://smg.photobucket.com/albums/v9...Clough/Dakota/

    1985 Kawasaki GPz550
    2003 SV650S (Race)
    1973 W100 Powerwagon


    Mater: I don’t need to know where I’m goin’, I just need to know where I been!

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •