I have a 2000 RT . Who makes a good weld up cage (steel ) ?
I have a 2000 RT . Who makes a good weld up cage (steel ) ?
Rhodes Race cars makes one that Im thinking of getting.
https://www.rhodesracecars.com/10-Po...UP_p_9272.html
I used Rhodes, their main hoop was too wide, when I added the halo, it was too narrow, they made good on everything, but there are better options out there. Best is to get one custom bent.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
The two bars from main hoop to frame?
They are straight, no bends, straight is stronger.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Be sure to box the frame in where all the bars attach.
I have since added a full spare tire carrier back in and to get the bed off, you'll have to cut it.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Regular cab?
I had the main hoop bent so it would angle back closer to the rear of the cab.
I still had the stock door panels, the arm rests hit the down bars so I went full Tin Can.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
bet you hated to cut the bed.
They come long and notched on one end for the main hoop.
11.27 @ 118.232017 NM Mopar Challenge Series Champion