One set of bushings I have will work with some modification although I was hoping for something a little different. This must be the bushing others are using. Nonetheless, I have an idea that may make it a better install and function so I’ll do some mock-up to see how it turns out.
I have seen some other control arms that use a smaller bushing or the OEM replacement poly bushings for the ’00-04 passenger’s side control arm but those guys must be welding up the control arm with the pivot shaft already in place within the bushing sleeves. Otherwise they’d never get it in and once done that way they might have to dig the bushings out in order to replace them if they wear out.
I want mine to be relatively easy to install or remove the pivot shaft for easier bushing replacement if necessary. The bushing sleeve set-up shown in post #65 will work but I’m trying to make it less complicated.