Ok - some of you may have seen the fun I'm having with my new R/T (my sons really)...
So will be going with the following (some are already installed), will pull SB this weekend:
EQ heads with port match and clean up (Springs to match cam)
KB Hyperutectic Pistons (will be about 10-10.5 to 1)...yes they come out of the hole. Had like 150-160 cranking compression @ 5280'
M1 TB Intake
Upgraded TB 52mm
I-Beam Rods
2500 stall converter (newer trans with some goodies)
4.56 gears (Stock R/t Wheels)
Undecided on Rockers/Pushrods and Cam.
Looking/considering the Comp Cams 20-811-9 (.538/.534) or Hughes? I realize the 1.5 or 1.6 will matter on the cam specs...
Will have an Tune (of course).
We are on a budget, but want at least 400hp.