Whats master size are you guys using with the stock 01 front disks and 03 rear disks.
*Used the search function but it sucks and anything that came up was pretty old*
Whats master size are you guys using with the stock 01 front disks and 03 rear disks.
*Used the search function but it sucks and anything that came up was pretty old*
That is a loaded question, I'm running a 1" bore master with a modified stock brake pedal to achieve a 6:1 pedal ratio.
This signature has been deleted thanks to photobucket!
What he ^^^ said, it's way more than MC bore size, ya gots to get the pedal ratio right.... Google it, tons of info, but you ain't gonna find it here.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
I had a thread on it...
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Right, i know there's more to it. Just seeing what you guys are running. So i can cheat haha. I was thinking 7/8 - 1" bore with a 6:1 pedal. Also might mount it
under floor to keep it off the firewall.
Dave, I did see yours. Looks like you went with 1.032" bore. But the thread was from 2011 so just seeing if you changed it and found something better that works.
I'm pretty sure I went with 15/16...Twas a long time ago, but my Willwood came with the push rod, looks like the bigger versions don't.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Putin has some serious manual brake info.
FUCKING bitch.
11.27 @ 118.232017 NM Mopar Challenge Series Champion