I'm thinking about sending my Eddies out to get milled and ported since my local shop doesn't do porting.
Is Shady Dell still recommended? Most chatter about them is like ten years old. Did something happen?
I'm thinking about sending my Eddies out to get milled and ported since my local shop doesn't do porting.
Is Shady Dell still recommended? Most chatter about them is like ten years old. Did something happen?
Project Maverick. I feel the need, the need for speed
Ryan has been good to me in the past, what part of the country you in?
11.27 @ 118.232017 NM Mopar Challenge Series Champion
I'm in Louisiana but UPS can get them anywhere I want to send them.
According to their website I can get stage three porting, 5 angle valve job, milled to 58cc and valve guides
checked for about $1,000. Which seams like a good deal from a shop with a great reputation.
Just wondering if that reputation is still good since I'm not seeing much recent talk about them.
Project Maverick. I feel the need, the need for speed
You don't hear much about Shady Dell anymore, Precision Cylinder Head is going to do all my porting in the future, the owner, Shane Studly personally does everything, he builds motors for the stock racers....He's in Utah.
Facebook, no website
https://www.facebook.com/shane.studley.1?fref=search
His 360 Dakota....
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Thanks, I'll check him out.
I fired off an email to Shady Dell earlier so I'll see how that goes.
Project Maverick. I feel the need, the need for speed
Shane is the real deal, Mopar guy too.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Good luck getting a hold of Ryan or Shady dell, Also check out Brett Miller, dude is a bad ass head/intake porter for the Mopar crowd.
This signature has been deleted thanks to photobucket!