+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 25 of 31

Thread: 03-04 Durango 2WD Spindles and Calipers

  1. #1
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default 03-04 Durango 2WD Spindles and Calipers

    I have the spindles and calipers for a 03-04 Durango. Comes with dust shields, all original hardware, 4 new bolts (just in case), new copper washers, and the calipers have been rebuilt with new seals and new pistons. Everything was carefully sandblasted and painted black with VHT caliper paint. Its more or less everything needed to do the front brake conversion minus the hubs, rotors, and pads. I was looking for $300 + you pay shipping.
    IMG_20171021_173025113.jpg
    IMG_20171021_173035131.jpg
    IMG_20171021_173040536.jpg

  2. #2
    Junior Member

    Status
    Offline
    Join Date
    Jun 2017
    Location
    Midway Park, NC
    Posts
    18

    Default

    Would you need to change to 03 brake lines or will 97-00 work?
    "You can't fix stupid but you can fix slow, too bad I'm both!"

  3. #3

    xjsc16x's Avatar
    Senior Member

    Status
    Offline
    Join Date
    May 2013
    Location
    Massachusetts
    Posts
    135

    Default

    Quote Originally Posted by Slowpoke'nBroke View Post
    Would you need to change to 03 brake lines or will 97-00 work?
    I'm not entirely sure what the difference is but they are listed as two different part numbers for the single piston (97-02) and dual piston (03-04 kota, 03 rango) setups.

    Might be different lengths. I just did this swap a couple months ago and used new NAPA hoses for the 03 durango.

  4. #4
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default

    Quote Originally Posted by Slowpoke'nBroke View Post
    Would you need to change to 03 brake lines or will 97-00 work?
    When I did my swap I used my original hoses, seem to work fine.

  5. #5
    Junior Member

    Status
    Offline
    Join Date
    Jun 2017
    Location
    Midway Park, NC
    Posts
    18

    Default

    Nice thanks
    "You can't fix stupid but you can fix slow, too bad I'm both!"

  6. #6
    Senior Member

    Status
    Offline
    Join Date
    Jul 2016
    Location
    Huntersville
    Posts
    208

    Default

    Good deal! If I hadn't just put on new rotors and pads on my '99 5.2L sport I would get these.

    Looking at the '99 brakes and the '03 side by side, these are much bigger/better!

    GLWS!
    '03 Stampede Graphite Metallic Dakota R/T CC

    FRP tune, M1 2bbl, HiPoTek 52mm TB, K&N 14" Filter, Headers, Flowmaster duals

  7. #7

    xjsc16x's Avatar
    Senior Member

    Status
    Offline
    Join Date
    May 2013
    Location
    Massachusetts
    Posts
    135

    Default

    Quote Originally Posted by Hatchman View Post
    Good deal! If I hadn't just put on new rotors and pads on my '99 5.2L sport I would get these.

    Looking at the '99 brakes and the '03 side by side, these are much bigger/better!

    GLWS!
    Just not worrying about having to helicoil the spindle is enough to justify the swap

    But even stock for stock these are a huge upgrade. Dual piston calipers vs single, bigger od and thicker rotors (rangos were thicker than dakota too), and the caliper is mounted to a bracket instead of slide pins.

  8. #8
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default

    These are still for sale. I'm also using a business account for shipping, so it will probably be cheaper then you expect.

  9. #9

    Default

    Does this bolt right up on a 2001 ?

  10. #10

    I like free kittens

    Status
    Offline
    Join Date
    Jul 2011
    Location
    Marysville O-H-I-O
    Posts
    7,072

    Default

    Quote Originally Posted by Gentleman Jack View Post
    Does this bolt right up on a 2001 ?
    Yes
    --Tom
    **Photobucket can suck my nut**

    I'm a douchebag

  11. #11



    99dart's Avatar
    DRTC Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Washington...the hot side!
    Posts
    3,792

    Default

    Quote Originally Posted by Vpool View Post
    These are still for sale. I'm also using a business account for shipping, so it will probably be cheaper then you expect.
    That's good info. I thought about buying from you, but figured shipping would kill the good asking price. :/ I got spindles locally for $130.
    99 DA CC R/T
    13.97@100 w/modded kegger & ported TB
    12.96 @103 new 365 C.I (guessatune
    http://imgur.com/a/lOVuZ

  12. #12
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default

    Quote Originally Posted by 99dart View Post
    That's good info. I thought about buying from you, but figured shipping would kill the good asking price. :/ I got spindles locally for $130.
    $130 for the spindles is a good price. One guy wanted me to see the cost of shipping to Texas and with the business account it was only $55.

  13. #13
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default

    3 months later and I still have these for sale. Parts are all boxed up and ready to ship!

  14. #14
    Junior Member

    Status
    Offline
    Join Date
    May 2016
    Location
    miami gardens
    Posts
    3

    Default

    Time for a price drop?

  15. #15
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default

    Quote Originally Posted by BusaLee1300 View Post
    Time for a price drop?
    Sure, that this point I guess it cant hurt. $200 + shipping, would also be willing to hear offers.

  16. #16
    DodgeSqD's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Central Flroida
    Posts
    282

    Default

    How close are you to Red Bluff CA .

  17. #17
    DodgeSqD's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Central Flroida
    Posts
    282

    Default

    How close are you to Red Bluff CA .
    Ill be there on sunday .

  18. #18


    Corey's Avatar
    GPz550 Addict

    Status
    Offline
    Join Date
    Sep 2009
    Location
    San Lorenzo, CA
    Posts
    1,927

    Default

    PM sent a few days ago.
    DRTC #1176

    2000 Bright White CC (1/553)
    Dyno'ed 07/05/13 (126,000 Miles) 230 Hp / 308 Tq
    14.6 @ 93 mph (2.18 60 ft.), 4130 lbs.(1/2 tank gas)
    Truck Pictures --> http://smg.photobucket.com/albums/v9...Clough/Dakota/

    1985 Kawasaki GPz550
    2003 SV650S (Race)
    1973 W100 Powerwagon


    Mater: I don’t need to know where I’m goin’, I just need to know where I been!

  19. #19
    niebs's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    North DE
    Posts
    1,581

    Default

    these fit 15" wheels

  20. #20
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default

    Quote Originally Posted by niebs View Post
    these fit 15" wheels
    I think so but I'm not sure. You would have to verify with someone else.

  21. #21
    Vpool's Avatar
    Member

    Status
    Offline
    Join Date
    Sep 2014
    Location
    Shasta Lake, CA
    Posts
    52

    Default

    Quote Originally Posted by DodgeSqD View Post
    How close are you to Red Bluff CA .
    Ill be there on sunday .
    Sorry I never got back to you, I forgot I had this up for a little while. The sale with Corey didn't work out so they are still up for grabs. I will work on checking more often.

  22. #22

    I like free kittens

    Status
    Offline
    Join Date
    Jul 2011
    Location
    Marysville O-H-I-O
    Posts
    7,072

    Default

    Quote Originally Posted by Vpool View Post
    I think so but I'm not sure. You would have to verify with someone else.
    Nope

    There’s a reason that 15” wheels were no longer an option starting in 2003
    --Tom
    **Photobucket can suck my nut**

    I'm a douchebag

  23. #23



    chrgr340's Avatar
    DAKRT56

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Two Harbors, MN
    Posts
    750

    Default

    Still for sale?

    Steve - 1999 Flame Red RC R/T-56
    Comp Cams | F&B | Mopar | Spintech | SCT | Hotchkis


  24. #24
    DodgeSqD's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Central Flroida
    Posts
    282

    Default

    Are you near Red Bluff Ca .its a stop I make every few months .

  25. #25




    slammedR/T's Avatar
    "Bleach Master"

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Jacksonville, FL.
    Posts
    3,910

    Default

    Quote Originally Posted by niebs View Post
    these fit 15" wheels
    Won't clear stock Dakota 15" wheels but a skinny 15" race wheel will clear them with a 1/4" spacer, I'm running Bogarts 15x4" with 03 Durango brake conversion on my R/T
    This signature has been deleted thanks to photobucket!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •