Is there any demand for a pair of 99 Dakota knuckles and calipers? For Free.
These were taken off of my one owner, winter garaged since 03, Dakota. Caliper mounting holes are in excellent condition. A few years ago I rebuild the calipers, new pads, seals, and mounting hardware. Disclaimer; the driver side caliper seized recently because of an internally collapsed brake line that should have been replaced at the time. The caliper should be good except for some toasted paint, may want to replace the piston seal for piece of mind.
These are in Iowa. Shipping is likely prohibitive, could probably work something out within the State within reason or I am driving to Colorado on I80/I76 at the end of the month. A meet-up along the way could probably work.