+ Reply to Thread
Results 1 to 3 of 3

Thread: 99 Dakota Steering Knuckles/Brake Calipers

  1. #1

    9t9-5.2's Avatar
    Home School Valedictorian

    Status
    Offline
    Join Date
    Jun 2014
    Location
    Central Iowa
    Posts
    952

    Default 99 Dakota Steering Knuckles/Brake Calipers

    Is there any demand for a pair of 99 Dakota knuckles and calipers? For Free.

    These were taken off of my one owner, winter garaged since 03, Dakota. Caliper mounting holes are in excellent condition. A few years ago I rebuild the calipers, new pads, seals, and mounting hardware. Disclaimer; the driver side caliper seized recently because of an internally collapsed brake line that should have been replaced at the time. The caliper should be good except for some toasted paint, may want to replace the piston seal for piece of mind.

    These are in Iowa. Shipping is likely prohibitive, could probably work something out within the State within reason or I am driving to Colorado on I80/I76 at the end of the month. A meet-up along the way could probably work.

    "We got no fear no doubt all in balls out"

  2. #2



    I like free kittens

    Status
    Offline
    Join Date
    Jul 2011
    Location
    Marysville O-H-I-O
    Posts
    6,992

    Default

    I'd want them for a front brake kit but I don't have any prospective buyers on the horizon.
    --Tom
    **Photobucket can suck my nut**

    I'm a douchebag

  3. #3



    chrgr340's Avatar
    DAKRT56

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Two Harbors, MN
    Posts
    635

    Default

    I wouldn't mind having some spares for my '99. Maybe we could work something out; I'm not too terribly far away.

    Steve - 1999 Flame Red RC R/T-56
    Comp Cams | F&B | Mopar | Spintech | SCT | Hotchkis


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •