+ Reply to Thread
Results 1 to 4 of 4

Thread: Q3 TOTQ Hatchman

  1. #1
    Senior Member

    Status
    Offline
    Join Date
    Jul 2016
    Location
    Huntersville
    Posts
    208

    Default Q3 TOTQ Hatchman

    I am honored to be nominated for the Q3 TOTQ for 2017. Bought the 2003 Graphite Metallic with factory Stampede kit on 7/13/16 from Racerwill.

    Will wanted to make sure to sell her to an R/T enthusiast who would take good care of her. I hope I have done just that



    Over the past year, did a few mods/repairs:
    Multiple EVAP hoses to fix the CEL to pass inspection
    Front Inner Fender liners 7/25 (beat up from being lowered)
    Flowmaster Exhaust Duals 7/29 (one side broken off, would not pass inspection)
    Tranny, Pwr strn, brake fluid change 7/31
    Adjusted the transmission shift cable, no more problem going into park!
    75W/90 rear end fluid 8/11 (rear end was still whining)
    White gauges overlay 9/5 (over the blue flame gauges)
    Rebuilt the Rear End 9/30 $1200 (OEM 3.92 gears)
    "Leather" 2 tone black/grey Seat covers 10/16
    4x New Nitto 450 Tires 10/21
    New Fog lights, EOM style 10/22
    4x HIDs in the fog lights and head lights 10/22
    Key/fob 11/11 (can only get one fob and one key programmed, issue with aftermarket alarm)
    New Steering pump & tensioner pulley 12/09 (one leak fixed!)
    Ceramic Window Tint 12/16
    Front end Alignment 1/17
    Truxport Roll-up Bed cover 1/20 (just replaced the dry rotted cover, same frame)
    Crossdrilled/slotted Powerstop rotors and Hawk Ceramic pads 107K, 2/26
    Powder Coated the M1 2bbl in "Polished Aluminum" 3/30
    52mm TB from HiPoTek
    FRP Tune (93octaneM1V10) Street tune (was grandfathered in the custom email tuning deadline, FRP is the best!)
    Mopar Valve Covers with hand painted black inserts and Gaskets
    180F Thermostat
    Thermostat neck
    Upper/Lower Rad hoses and heater hose
    Painted fuel rails, battery bracket, other stuff (gloss black)
    New Harmonic Balancer (About to come apart, heard it tapping on the timing chain cover, glad I caught it!)
    K&N 14" round air filte

    Love the truck. Looking forward to many more years and mods with her.
    Thanks again for the TOTQ Nomination!
    '03 Stampede Graphite Metallic Dakota R/T CC

    FRP tune, M1 2bbl, HiPoTek 52mm TB, K&N 14" Filter, Headers, Flowmaster duals

  2. #2

    Default

    Love this truck, wish I had one in my collection.

    Whiplash Engine & Machine, FRP Tuned
    Instagram moderator for dakota_rt_club

  3. #3


    ScojoDak's Avatar
    Black Pearl

    Status
    Offline
    Join Date
    Aug 2008
    Location
    Kingman, Az
    Posts
    2,795

    Default

    Nice hatch
    If you haven't lived for something, you'll die for nothing.

  4. #4
    Senior Member

    Status
    Offline
    Join Date
    Jul 2016
    Location
    Huntersville
    Posts
    208

    Default

    Thank you for the kind words!
    '03 Stampede Graphite Metallic Dakota R/T CC

    FRP tune, M1 2bbl, HiPoTek 52mm TB, K&N 14" Filter, Headers, Flowmaster duals

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •