Yeah my pc would reduce it for me but it crashed for the final count. Now I'm using my laptop but the same program don't work the same on it.
Yeah my pc would reduce it for me but it crashed for the final count. Now I'm using my laptop but the same program don't work the same on it.
Don't have a lap top or a desk top?
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Easiest way to shrink the size of a photo is to email it to yourself and select the photo size to small or medium.
i can reduce it...but fuck i dont want to! lol.... i will work on getting them posted! just been busy
Be yourself, everyone else is already taken11.1 @ 120
all good man!!! i got banned shortly after you did so i probably would not have been able to reply back to you any way! lol..i did a bunch or research and decided that the 8 1/4 will be fine to start..i will upgrade to something different when i cant keep it together any more
Be yourself, everyone else is already taken11.1 @ 120
Easiest way to shrink the size of a photo is to email it to yourself and select the photo size to small or medium.
thats a great idea!
Be yourself, everyone else is already taken11.1 @ 120
Ok got them resized thanks Wiggsy72 for the awesome idea! couple pictures of her back on all 4 after rear frame was cleaned up and painted black with new leafs.. cal tracks new u bolts and shocks should be here tomorrow.. once motor is actually in will get ride height dialed...
Attachment 14645
Attachment 14646
Attachment 14647
next project is getting the holes repaired in the cab from the tannoue cover hinges from the previous owner..i dont have any real plans for a repaint at this point..i like em a little rough around the edges..but that is driving me crazy lol
Last edited by JamesEcker; 10-30-2017 at 01:19 AM.
Be yourself, everyone else is already taken11.1 @ 120
Links no work for me...
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
Nice job on this build thusfar..... I'm really impressed with how quickly you are getting projects done.... I've been building mine for ever. Just got back into working on it.... Good luck and hope to see times from you soon.
02 QuadCab 3.9 (5spd conversion in progress one day Powerdyne S/C and MS3 tuned)
91 Excab 390 stroker, One day completed
2011 Durango Tow pig
63 Dart One day completed
13 Challenger R/T
Quick up date! got the caltracs all mounted up new leaf springs/ calvert drag shocks..cleaned and painted the frame rails installed fuel pump and ran fuel line and batter cable to the cab ready for when i do the engine compartment. here are a few pictures right after i put the bed back on..it was dumping down rain today at home witch gave me an excuse to work on truck instead of doing some fall yard work got the fuel cell mocked up hole cut for the sump and got the bulkhead connector installed and made the vent line..still need to get my one way vent valve in cell
23800196_10212298799237845_4168848261271369359_o.jpg
23915815_10212310712735675_130900692251745921_n.jpg
23905682_10212310713015682_2041173674034975902_n.jpg
Be yourself, everyone else is already taken11.1 @ 120
Be yourself, everyone else is already taken11.1 @ 120
Here are some more pictures that where not working before.. the last 2 are before and after i repaired the 2 big dents in the cab back from the previous owners tanoue cover.. the rest are some build pics in no order
22780614_10212075347411689_3187923018373365851_n.jpg
22886061_10212144668704678_2647378549707054166_n.jpg
23755203_10212278604933000_4348000993226047985_n.jpg
23032884_10212158821138480_3813776264608163524_n.jpg
23231441_10212158821298484_8466808959952106793_n.jpg
Be yourself, everyone else is already taken11.1 @ 120
Nice work, after reading this thread, I started back up on my Drag truck build. Thanks for the motivation.
02 QuadCab 3.9 (5spd conversion in progress one day Powerdyne S/C and MS3 tuned)
91 Excab 390 stroker, One day completed
2011 Durango Tow pig
63 Dart One day completed
13 Challenger R/T
still been trucking away at the build...dont get on the forum much but im still here not too much progress been saving my pennies getting ready to order more parts. i was able to get my block dropped off to my builder in Spokane and put a deposit down he will be starting on it shortly!!! original plan was just boring it over and some forged pistons..but after some thinking and reading deciding to go 408 with a full scat rotating assembly and some indy heads!! should be a fun little truck when done cant wait!
Be yourself, everyone else is already taken11.1 @ 120
How much stall are you going with on that 904?
2003 Dakota R/T CC Flame Red. Bolt ons, Built Trans.
Dynotune Nitrous Wet system, 100 shot, FRP tuned. (SOLD! Gone but never forgotten)
Acts 2:38
Been a while since my last update..been busy with summer stuff and progress has slowed down as we are saving for a house...picked up the short block from my machinist over the weekend..i got it converted over to manual brakes as well as got my fuel log and regs mounted... not alot of progress but some is better then none!
44053662_10214670004676499_7067560649131294720_n.jpg
41992104_10214487021662038_7451214461181886464_n.jpg
42526410_10214544902949034_3830747250460459008_n.jpg
Was orginaly going to do just a stock stroke motor...ended up going 408 with a scat rotating assembly..icon forged pistons
will be going with some eddy heads...stainless valves and all the other goodies
Be yourself, everyone else is already taken11.1 @ 120
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
Cool project! Any progress?
Little Update-
while saving for a house has slowed project down a little bit i was able to sneak a little money out for the rear end. i was originally going to run the 8 1/4 until it blew...but wanting to be relatively smart and not have a silly track mishap while i am trying to learn the truck i opted to upgrade..alot of research and cruising the web i landed on going with a ford 9" im not a junkyard cruiser and with some things i think its just easier to get new.. i opted for a quick performance ford 9" housing and axle package.. 1/4" walled tubes fabbed center section and 31 spline axles...a good friend of mine was nice enough to gift me a complete center section..nothing fancy but it will get me going... bone stock with some 3.55 gears and a spool...i don't know how the gears will work out but i figured they are an ok starting point and easy enough to change down the road... will be going with disc brakes on the rear...next up is doing the shock brackets and relocation
50608305_10215367125144075_3560449144453595136_n.jpg
50321325_10215355121964003_3905412198884704256_n.jpg
Be yourself, everyone else is already taken11.1 @ 120
Noice!
"Excuse me if I have some place in my mind, where I go time to time"
Good to see your project is still moving
Little more progress on the 9" install..... keep in mind i am not a chassis guy or a fabricator most of my skills/knowledge are all self taught google college.
Stole the idea from adobe (david) really like how the had the upper shock tube done...measured about 24 times and drilled once came out pretty good now to get it all tacked up and make any final tweaks before final welding it!!!
IMG_1949.jpg
IMG_1956.jpg
IMG_1954.jpg
Be yourself, everyone else is already taken11.1 @ 120
IMG_1965.jpg
IMG_1969.jpg
Got the upper bracket done today...lower its tacked where it needs to be..pretty good progress for a snowy sunday
Be yourself, everyone else is already taken11.1 @ 120