+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 25 of 55

Thread: First run with the Hemi swap.

  1. #1

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    Default First run with the Hemi swap.

    Regular cab, no weight reduction, 2250 DA.
    2016 6.4L 392 Hemi, T56, 3.92s, Caltracs. Nothing trick, no powershifts, no WOT box, factory tune.

    Stock 17s up front, Bogarts with 28x10x15 Hoosiers in the rear and an extremely conservative launch.

    60ft - 1.994
    594ft - 7.749
    1/8 mile - 8.255 @ 88.98
    1/4 mile - 12.593 @ 109.92

    Went 13.01@111 on April 2008 coded Goodyear 255s. lol

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  2. #2
    Osee's Avatar
    AutoZone Perfomance Parts

    Status
    Offline
    Join Date
    Jul 2013
    Location
    Ethelbert, Manitoba
    Posts
    2,300

    Default

    Damn that's pretty stout! Do you have a thread on it? I've fallen off the radar for a bit.


    Mods - TB Spacer, Short Throw Dipstick, Performance Auto Zone Intake "0.30 over bore", R/T Cam, Performance Chip, Radiator Delete

    Rev limiter? that's what valve springs are for!

  3. #3

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    Default

    nah i've only posted here like 3 times in the last 4 years. lol

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  4. #4


    GoFastGray's Avatar
    Accumulating parts...

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Ventura, CA
    Posts
    4,525

    Default

    Sweet! Do you have more mod plans for the hemi?
    12.10@106@Famoso Raceway

  5. #5

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    Default

    At some point. Right now I'm just gonna drive it though.

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  6. #6

    Default

    I would be very interested to see this. Engine bay, mounting, trans setup etc. Like a build thread or something. Im having a feeling my truck is gonna need a new engine, and still tossing around different ideas.

    I GOTCHU RAINES!!

  7. #7



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Pics or it didn't happen.
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  8. #8

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    Default

    Quote Originally Posted by Adobedude View Post
    Pics or it didn't happen.
    What do people use to host images these days?

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  9. #9



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Just load em up on the forum
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  10. #10
    Bowman24's Avatar
    R/T Lives Matter

    Status
    Offline
    Join Date
    Dec 2014
    Location
    Minnesota
    Posts
    157

    Default

    How difficult was the swap? There is a good chance I will be going down that road
    99 R/T
    The never ending project

  11. #11
    niebs's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    North DE
    Posts
    1,761

    Default

    Very nice. So thats bone stock? Not too shabby. I have a 5.7 on the engine stand right now that im building for my dak. You should be able to shave a good amount off once shes dialed in.

  12. #12



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Good info on Gen III Hemi builds on moparts.
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  13. #13

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    Default

    Quote Originally Posted by dak4700 View Post
    I would be very interested to see this. Engine bay, mounting, trans setup etc. Like a build thread or something. Im having a feeling my truck is gonna need a new engine, and still tossing around different ideas.
    2016 SRT 6.4, stock accessories. Frame trimmed for alternator clearance. Grand Cherokee SRT power steering pump and reservoir.
    Ram SRT10 transmission, QuickTime small block Mopar bellhousing, 130 tooth McLeod flywheel, 10.5" clutch, stock Ram SRT10 shifter with modified Challenger SRT pistol grip shifter
    Mopar 392 Crate kit. HHR fan, stock radiator. Walbro 255 pump. 6AN feed and return lines, Aeromotive A1000 fuel pressure regulator.
    Schumacher engine mounts and oil pan. Milodon pickup for 5.7/6.1 cut and reclocked to fit 6.4 oil pump.
    99+ brake booster for coil clearance. Tubular upper control arms for header clearance. Custom long tubes with 2" primaries into 3.5" slip on collectors. Auto Meter gauges.

    Pretty simple setup, all things considered. Could be done a little cheaper with a 5.7 VVT motor and still using the Mopar stuff. Runs like a stock '16 Challenger. Doesn't get hot in traffic. 1900rpm at 80mph with 3.92 gears.

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  14. #14

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    Default

    Quote Originally Posted by niebs View Post
    Very nice. So thats bone stock? Not too shabby. I have a 5.7 on the engine stand right now that im building for my dak. You should be able to shave a good amount off once shes dialed in.
    That's a bone stock 392. Original spark plugs and everything lol.

    Ok, I lied, it's got a spectre air filter and long tubes. Other than that, it's stock.

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  15. #15
    niebs's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    North DE
    Posts
    1,761

    Default

    Very nice. This is the kick in the butt I needed to get back at mine. Stopped by a speed shop today to check their services. I need to get going on it .

  16. #16

    Default

    What long tubes? pics????
    Nice combo, nice truck!!!

  17. #17
    Osee's Avatar
    AutoZone Perfomance Parts

    Status
    Offline
    Join Date
    Jul 2013
    Location
    Ethelbert, Manitoba
    Posts
    2,300

    Default

    Quote Originally Posted by BlakDak71 View Post
    What do people use to host images these days?
    Imgur.com is the best image hosting website period.


    Mods - TB Spacer, Short Throw Dipstick, Performance Auto Zone Intake "0.30 over bore", R/T Cam, Performance Chip, Radiator Delete

    Rev limiter? that's what valve springs are for!

  18. #18



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Just load them on the forum as an attachment...
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  19. #19

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  20. #20


    99dart's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Washington...the hot side!
    Posts
    3,886

    Default

    Congrats on getting it done and running well!
    99 DA CC R/T
    13.97@100 w/modded kegger & ported TB
    12.96 @103
    10:8-1 .30 over forged bottom end
    R/T ported heads
    Detroit locker 4:56 gears
    Built 46RE MSaine 3500 stall Ultra Billet
    http://imgur.com/a/lOVuZ

  21. #21
    BIGROB's Avatar
    I killed Goose

    Status
    Offline
    Join Date
    Mar 2016
    Location
    Thibodaux, Louisiana
    Posts
    874

    Default

    That Hemi looks like it belongs in there

    Project Maverick. I feel the need, the need for speed

  22. #22

    Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    Grove city , Ohio
    Posts
    80

    Default

    Quote Originally Posted by BIGROB View Post
    That Hemi looks like it belongs in there
    That's what the factory should of done when they axed the 360. Looks good. Impressive results.

  23. #23
    BIGROB's Avatar
    I killed Goose

    Status
    Offline
    Join Date
    Mar 2016
    Location
    Thibodaux, Louisiana
    Posts
    874

    Default

    If Dakotas had gotten the Hemi 10 or 12 years ago they would have never died off.
    I could have ignored the ugliness of the gen-4 and gen-5 if that thing had a Hemi!

    Project Maverick. I feel the need, the need for speed

  24. #24




    slammedR/T's Avatar
    "Bleach Master"

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Jacksonville, FL.
    Posts
    3,910

    Default

    I hate you right now, this is my next planned Dakota truck

    Awesome job bud
    This signature has been deleted thanks to photobucket!

  25. #25
    niebs's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jun 2015
    Location
    North DE
    Posts
    1,761

    Default

    Perfect fit

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •