+ Reply to Thread
Results 1 to 3 of 3

Thread: '03 Stampede Graphite Metallic CC Build

  1. #1
    Senior Member

    Status
    Offline
    Join Date
    Jul 2016
    Location
    Huntersville
    Posts
    208

    Default '03 Stampede Graphite Metallic CC Build

    Almost exactly a year ago I purchased my '03 Graphite Metallic CC from Racerwill on 7/13/16.
    Link to the sale posting here:
    http://www.dakotart.com/forum/showth...light=stampede

    Actually saw it on Craigslist, but was searching around the forums and saw the posting and history on here as well.
    Will wanted it to go to an enthusiast who would take care of her and fix her up. I hope I've lived up to his expectations.

    Over the past year, here is the list of repairs/mods:
    Multiple EVAP hoses to fix the CEL to pass inspection
    Front Inner Fender liners 7/25 (beat up from being lowered)
    Flowmaster Exhaust Duals 7/29 (one side broken off, would not pass inspection)
    Tranny, Pwr strn, brake fluid 7/31
    Adjusted the transmission shift cable, no more problem going into park!
    75W/90 rear end fluid 8/11 (rear end still whining)
    White gauges 9/5 (put a white overlay over the blue flame gauges)
    Rebuilt the Rear End 9/30 $1200 (stuck with the OEM 3.92 gears)
    "Leather" 2 tone black/grey Seat covers 10/16
    New Nitto 450 Tires 10/21
    New Fog lights, EOM style 10/22
    HIDs in the fog lights and head lights 10/22
    Key/fob 11/11 (can only get one fob and one key programmed, issue with aftermarket alarm)
    Steering pump & tensioner pulley 12/09 (one leak fixed!)
    Ceramic Window Tint 12/16
    Front end Alignment 1/17
    Truxport cover 1/20 (just replaced the dry rotted cover, same frame)
    New Headliner 1/27 (no more pin up!)
    LED domes lights 1/30
    R/T embroidered Floormats 1/30
    Crossdrilled/slotted Powerstop rotors and Hawk Ceramic pads 107K, 2/26
    Powder Coated the M1 2bbl in "Polished Aluminum" 3/30

    Installed all the following over the last week:
    M1 2bbl
    52mm TB from HiPoTek
    FRP Tune (93octaneM1V10) Street tune (was grandfathered in the custom email tuning deadline)
    Mopar Valve Covers and Gaskets
    180F Thermostat
    Thermostat neck
    Mopar Valve Covers
    Upper/Lower Rad hoses and heater hose
    Painted fuel rails, batter bracket, other stuff (gloss black)
    New Harmonic Balancer (About to come apart, heard it tapping on the timing chain cover, glad I caught it!)

    Will post up some pics soon. Have to find a new home for forum posting pics now that Photobucket has lost their minds ($400 a year?) and clogged the site with pop-up ads.

    Next up:
    Full exterior paint job.
    Full sound system (has a bluetooth speaker and my iphone right now, ha!)
    Heads/cams/bottom end rebuild.
    Rear end still whines a little, believe it to be the clutches

    Love the truck, the past year has been great, looking for many more. Wish I had done the FRP tune sooner! Whole different vehicle now.
    '03 Stampede Graphite Metallic Dakota R/T CC

    FRP tune, M1 2bbl, HiPoTek 52mm TB, K&N 14" Filter, Headers, Flowmaster duals

  2. #2
    Senior Member

    Status
    Offline
    Join Date
    Jul 2016
    Location
    Huntersville
    Posts
    208

    Default

    Reserved for pics and updates and such.
    '03 Stampede Graphite Metallic Dakota R/T CC

    FRP tune, M1 2bbl, HiPoTek 52mm TB, K&N 14" Filter, Headers, Flowmaster duals

  3. #3
    Senior Member

    Status
    Offline
    Join Date
    Jul 2016
    Location
    Huntersville
    Posts
    208

    Default

    Reserved for more pics/updates.
    '03 Stampede Graphite Metallic Dakota R/T CC

    FRP tune, M1 2bbl, HiPoTek 52mm TB, K&N 14" Filter, Headers, Flowmaster duals

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •