Big thanks to Josh Klein, forget your username on here homie.
Big thanks to Josh Klein, forget your username on here homie.
This signature has been deleted thanks to photobucket!
Git-R-Done
If you haven't lived for something, you'll die for nothing.
Drip drip drip drip
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Tape on your arm?
DRTC #1176
2000 Bright White CC (1/553)
Dyno'ed 07/05/13 (126,000 Miles) 230 Hp / 308 Tq
14.6 @ 93 mph (2.18 60 ft.), 4130 lbs.(1/2 tank gas)
Truck Pictures --> http://smg.photobucket.com/albums/v9...Clough/Dakota/
1985 Kawasaki GPz550
2003 SV650S (Race)
1973 W100 Powerwagon
Mater: I don’t need to know where I’m goin’, I just need to know where I been!
11.27 @ 118.232017 NM Mopar Challenge Series Champion
How many quarts?
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Josh - 98 BLK RC - Mad Milkshake Maker
Previous
99 BLK RC - Mad Trash Hauler - sold
99 DA RC - mad dak - Danno Stole it
01 SLVR RC - mad sexy - retired - then died
99 IB RC - mad RT - gone to heaven..
Former Certified member of the 11 Second NA RT Club
Next time I freshen up my motor it's going on, them off to an engine dyno to check for leaks.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
just had the pieces sheared and bent for the oil pan sump extension, I will post up pictures when done.
This signature has been deleted thanks to photobucket!
Well had the oil pan welded up today, my father warned me with the oil that was in it and the ceramic coating on it the welds would not be pretty, but they will be good strong welds. I will get pictures up maybe tomorrow as I want to paint it first.
Update, the welds are UGLY!!! but strong and no leaks, I water tested again last night to see how many quarts it will hold which is now 7.5qts. So Scott Quantra's original claim of a 6qt. pan was completely bullshit which is not a surprise.......
Last edited by slammedR/T; 03-29-2017 at 08:28 PM.
This signature has been deleted thanks to photobucket!