Probably stupid to ask but... Zeus.jpgYl9NY9v.jpg throttle body.jpg Not a great pics, if I need more I can add them
Probably stupid to ask but... Zeus.jpgYl9NY9v.jpg throttle body.jpg Not a great pics, if I need more I can add them
1. looks to be m1, need pic of intake to be positive.
2. no idea
3. possible aftermarket/bored out. Fastman?
I'm just going by the "wag" method on this. Anybody else got anything?
Shitty pictures get shitty answers.
What are the numbers on the injectors?
11.27 @ 118.232017 NM Mopar Challenge Series Champion
The # on the injector is A008A06127. Good answers for shitty pics IMO! I will try to get some better ones just trying to get a starting place. I guess on the intake I was more asking, if it says Zeus does that make it an M1? The throttle body looks a lot like the 2x52x55 from http://www.fbthrottlebodies.com/products.htm. Thanks guys.
Does it look like this?
yes, #s are different and it doesn't say Mopar, but it is otherwise very similar as far as I can tell.
What # is on yours? And boomer sooner!!
Please forgive me, I know I am ignorant here. So, its not an M1, its an MPI? Or is it both, like its a Dodge and a Dakota? One down. Now just 2 more easy ones, the injectors and throttle body, then I will start working on what heads and cam I've got(not even sure where to start on those). Then on to a tune, FRP I'm on my way. You guys are F'ing great. Thanks
It's an M1 two barrel manifold, worth its weight in gold.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Need to get solid info on cam, heads and TB before worrying about injectors and tune.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Here's a helpful injector site I found a few years ago. Are there any numbers on the back side? I don't see the number you posted on any of the injectors. Most of ours start with 0280150....
http://www.dakotart.com/forum/showth...ion-Flow-Specs
Last edited by 99dart; 12-31-2016 at 01:57 PM.
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
Definitely R/T heads. Found it on the driver side front. That doesn't tell me if anything has been done to them but, at least it's a positive ID. I have no idea where to start on the cam. Any thoughts?
Holy Doodles!! 60 pounders! It is an na engine, right?
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
As the details trickle in.....
11.27 @ 118.232017 NM Mopar Challenge Series Champion
99 DA CC R/T
13.97@100 w/modded kegger & ported TB
12.96 @103
10:8-1 .30 over forged bottom end
R/T ported heads
Detroit locker 4:56 gears
Built 46RE MSaine 3500 stall Ultra Billet
http://imgur.com/a/lOVuZ
confirmation on the throttle body,
bruce
12:20 PM (2 hours ago)
to me
Thats a 980cfm 55x53 !
Bruce K Bridges
F&B Performance Engineered Products
766 Ocean Crest Rd
Cardiff by the Sea CA 92007
www.fbthrottlebodies.com
858 324 1770 PST