-
Supporting Vendor
Status
- Offline
HiPoTek Turbo Cams
HiPoTek has introduced a line of turbo cams for the 5.2/5.9 Magnum. The two different categories are: 1) Reverse Split and 2) Single Pattern. These two lines offer a great variety of possible grinds since it is difficult to address all turbo combinations with just a few cam grind offerings. The customer may choose their Duration, Lift, and LSA depending upon their build configuration and the efficiency of the turbo system being utilized. The single pattern profiles are suited more toward very efficient turbos that exhibit around a 1:1 ratio between boost and exhaust back pressure. For instance, 10# of boost compared to 10# of exhaust back pressure. The reverse split cam is suited more toward less efficient turbos and rear mount turbos that have a boost-to-back pressure ratio of around 1:2. For instance, 10# of boost and 20# of exhaust back pressure. These are general guidelines and not absolute.
http://stores.hi-potek.com/camshaft-turbo/
-
Senior Member
Status
- Offline
Posting Permissions
- You may post new threads
- You may post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules