+ Reply to Thread
Results 1 to 2 of 2

Thread: HiPoTek Turbo Cams

  1. #1

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,972

    Default HiPoTek Turbo Cams

    HiPoTek has introduced a line of turbo cams for the 5.2/5.9 Magnum. The two different categories are: 1) Reverse Split and 2) Single Pattern. These two lines offer a great variety of possible grinds since it is difficult to address all turbo combinations with just a few cam grind offerings. The customer may choose their Duration, Lift, and LSA depending upon their build configuration and the efficiency of the turbo system being utilized. The single pattern profiles are suited more toward very efficient turbos that exhibit around a 1:1 ratio between boost and exhaust back pressure. For instance, 10# of boost compared to 10# of exhaust back pressure. The reverse split cam is suited more toward less efficient turbos and rear mount turbos that have a boost-to-back pressure ratio of around 1:2. For instance, 10# of boost and 20# of exhaust back pressure. These are general guidelines and not absolute.

    http://stores.hi-potek.com/camshaft-turbo/

  2. #2

    y2krtaf's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Phoenix, Az
    Posts
    3,472

    Default

    Very nice!

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •