I happen to have a complete MS3X forsale with the unicorn Viper jumper harness... I also have a full set of LS2 truck coils I'll throw in with it, which are perfect for use with MS.
--Justin
----------------------------------------
'87 Ramcharger 360 swap and 35s
'06 300C SRT-8 Diablo 93 oct, 176 t-stat, no cats 12.3@113
'00 Dakota R/T Prev: 386whp/425tq 11.73@115.8 NOW: Under the knife
random (possibly stupid) question for the MS users.. can it give a smog friendly OBD2 reading, meaning provide a READY status for catalyst o2 evap etc?
No it doesn't, you'd have to do a parallel install and follow the jtec into doing that for you.
--Justin
----------------------------------------
'87 Ramcharger 360 swap and 35s
'06 300C SRT-8 Diablo 93 oct, 176 t-stat, no cats 12.3@113
'00 Dakota R/T Prev: 386whp/425tq 11.73@115.8 NOW: Under the knife
I just called SDConcepts, hopefully they get back to me soon, so I can pick one of these up. I'll try to keep the community updated.
02 QuadCab 3.9 (5spd conversion in progress one day Powerdyne S/C and MS3 tuned)
91 Excab 390 stroker, One day completed
2011 Durango Tow pig
63 Dart One day completed
13 Challenger R/T
It's from a '99+ Jeep 4.0L, part number 84S4601:
http://www.ebay.com/itm/111682494730
And here's a new pigtail if you don't feel like roaming the yards, part number S2099:
http://www.ebay.com/p/Engine-Camshaf...p2047675.m4096
Jim
RaceMagnum
Thought I had a picture of sensor/adapter, but apparently I forgot to take one...
Jim
RaceMagnum