Took the truck to get coffee, went to the butchers. And took it to a local car show.
Here is a video from my brothers supercharged srt/10 ram following me down the road.
https://youtu.be/Y2VOxOMPjcw
Took the truck to get coffee, went to the butchers. And took it to a local car show.
Here is a video from my brothers supercharged srt/10 ram following me down the road.
https://youtu.be/Y2VOxOMPjcw
Sent my axles back to moser to have the drilled and tapped for 5/8-18 studs.
This is my year. Truck is done. Ready to make some passes.
Doing drag week? Its finally on our coast.
Hell ya. Post lots of videos
Thanks guys
Lots of stuff I would like to buy from you Richard.
Poly motor mounts
Tubular A arms when your done.
Well I ended up buying djm lower control arms, cut them up and redesigned them to accept Viking double adjustables. Man does the nose lift under moderate acceleration. The beltech drop springs that were in there were like having bricks for coils. Ended up lowering the front and the back during the process. And also welded in a TRZ anti roll bar. I wanna get this thing hooking off the line over 4000 rpm
2001 Dodge Dakota Sport 4.7L 75shot: 13.140 @ 102.990 MPH
2001 Dodge Dakota Sport 4.7L NA: 13.782 @ 98.630 MPH
Dyno video
www.AIRRAM.com Discounted Performance Parts with FREE SHIPPING!
2003 Dakota R/THibernationPrevious Best10.77@124
*Disclaimer - All suggestions given for performance modifications is assuming that you live close or at Sea Level
Yea man, been stationed in Germany for 30 months now. Probably going to Hawaii for my next assignment. Truck has been sitting in my garage at home. Engine is back in as is the trans. Can't get the wiring done though. Maybe I will put it on a trailer and take it to someone over a leave period or something. Just to much time outside the country.
Happy to see yours is moving along nicely.
2003 Dakota R/THibernationPrevious Best10.77@124
*Disclaimer - All suggestions given for performance modifications is assuming that you live close or at Sea Level
Always been one of my favorite trucks.
Are you running on gas only ? what do you expect for HP. ?
What lift and duration are running on cam ? NICE TRUCK..
Very cool! Glad you're getting that beast ironed out, been quite a haul huh?
408, HiPoTek, FRP Tuning, Martin Saine 46re12.33 @ 1102018 Renegade Raceway Summit Series Sportsman Champion