So here is what some of you guys have been waiting for, a way to put a 4bbl tb on an m1. Here is the rendering after a few changes to the prototype.
These linkage brackets will be CNC laser cut and CNC bent out of 11ga stainless steel. The rear bracket is slotted to allow adjustability of tv cable. It will include stainless hardware to mount.
To make the tb as plug and play as possible I had custom TPS adapter harness made that reverses polarity as the GM TPS rotates opposite of the dodge. The iac harness is an extension harness as the iac is now at the front of the tb. So in short no cutting wires. The stock iac works by modding the mounting holes a tad and shaving the tip a tad on a bench grinder so it doesn't hang on the blades. I used an accel 1350 cfm billet tb for this project.
You will need to provide a carb spacer to get the TB off the fuel rails and an airhat spacer for the linkage to clear the airhat as it swings up now.
Price will be 99.99 shipped per assembly which includes main bracket, tv cable mounting bracket, stainless hardware and adapter/extension cables. We need 25 to get pricing on brackets and harnesses.
PayPal is sales@imotoconcepts.com .... Send as gift with "TB Bracket" in subject. INCLUDE SHIPPING ADDY!!!! Production in 2-3 weeks.