Reading other builds on YB and the turbo forums helped a lot so I figured I would share. Got most of the stuff frozen boost. Went with their intercooler, heat exchanger and fans. Having a 12x12x7 tank made with 1" NPT ports. Hose is 3/4" silicon heater hose from graingers. The frozen boost intercooler comes with 3/4" ports but the heat exchangers only come with 1/2" ports. Running 3/4" hose with two 1/2" ports makes no sense I drilled and tapped them. Heat exchanger will go under the bed with 3 small fans. Made a shroud for the fans and welded a 1.5" frame around the heat exchanger to fit all the fans.