+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 25 of 32

Thread: 1999 Dodge Dakota Roller or Part-Out

  1. #1

    Default 1999 Dodge Dakota Roller or Part-Out

    Things in my life have changed and I am going a different route with my racing interest. I am going to try and let go of the dakota I have as a Roller. I am keeping the engine and trans and maybe transplanting them into something else.


    1999 Dodge Dakota: $2950.00

    Holley HP 125 http://www.jegs.com/i/Holley/510/12-...ductId=757948\
    Harwood 8gal. Fuel Cell (plastic)
    -8 Steel Braided Fuel Lines
    Pro Comp Ultra-Lite Guages
    Aluminum Sheet Metal Dash
    Caltracs
    Grant Steering Wheel w/TB button
    B&M Pro Ratchet Shifter http://www.jegs.com/i/B%26amp%3BM/130/80842/10002/-1
    MSD Digital 6+ http://www.summitracing.com/parts/msd-6520
    Ford 9” Narrowed
    Mini-Tubbed
    4.33 Richmond Gears
    35 spline Strange axles
    Strange Full Spool
    Rear Disc Brakes from late 70s early 80s Chevy
    Hotchkis Leafs 3" Drop
    Caltracs
    1350 Spicer Slip Yoke
    S&W Racecars 8pt. Cage
    S&W Racecars Steering Column Kit
    Driveshaft Loop
    Weld Pro Stars 15x12 http://www.jegs.com/i/Weld+Racing/92...12208/10002/-1
    Weld Pro Stars 15.4 http://www.jegs.com/i/Weld+Racing/927/96-54202/10002/-1
    QA1 TD505s http://www.jegs.com/i/QA1/122/TD505/10002/-1
    Calvert CR22131 http://www.calvertracing.com/store/c...ally-p-77.html
    ARC wiring box http://www.jegs.com/i/ARC-Auto-Rod-C...rentProductId=
    **Custom** Hairyglass cowl hood


    There is probably more but I can't think right now what it might be. I am looking to also trade this for a Gen1 or Gen 2 RC SB 2wd Dakota or a early 90s FD3 RX-7 as a roller as well or comparable condition plus cash. This is a ROLLER only!! I can also arrange delivery if you pay fuel costs for me to deliver. Please feel free to PM me with offers and I will consider it. I am just getting out of the whole drag racing scene for now and building a fun street truck.
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  2. #2


    99dart's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Washington...the hot side!
    Posts
    3,886

    Default

    Sorry to see the truck go! I thought for sure we would see you put some 10's this year!
    99 DA CC R/T
    13.97@100 w/modded kegger & ported TB
    12.96 @103
    10:8-1 .30 over forged bottom end
    R/T ported heads
    Detroit locker 4:56 gears
    Built 46RE MSaine 3500 stall Ultra Billet
    http://imgur.com/a/lOVuZ

  3. #3

    Default

    Quote Originally Posted by 99dart View Post
    Sorry to see the truck go! I thought for sure we would see you put some 10's this year!
    If I could finish the truck it would EASILY go 10s especially a lil ole 390

    Life changes unfortunately :/
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  4. #4

    Default

    What part of Texas are you located in?
    Quote Originally Posted by blackknight View Post
    I guess taking the cap off would be too hard to check the fluid level, do you have a see thru engine block so you can also see your oil level?

  5. #5

    Default

    The truck is in Waco, Tx currently
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  6. #6


    krs1r/t's Avatar
    want more inchs STROKE IT

    Status
    Offline
    Join Date
    Aug 2009
    Location
    vineland, nj
    Posts
    5,863

    Default

    I hate to hear you getting out of the genIII game. I was looking forward to going back and forth with you this season.
    Hopefully the danno built motor in bruizers truck runs as good as yours to take your place.

    Good luck finding a new roller and building a street ride

    Bad Luck Truck
    Current setup
    „R„block 429ci W5 heads 700hp N/A
    1/8 mile #'s 6.47@105 1.37 60’ 10.23@131

    Old 1/4 numbers below with 408
    Fastest N/A 2010,2011,2014
    477-RWHP ?-RWTQ

    11.244 ET @ 119.71mph N/A
    FOXHOLE RACING
    "If you like me good, if you hate me, even better!"
    Chris

  7. #7


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    Good luck with the sale.

    If I didn't grow up with my truck I would get this and paint it black in a heartbeat.

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

  8. #8



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Well damn.....This sucks.

    It's a great buy for someone wanting a fast Flame Red RC.

    Which is everyone that doesn't have one.
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  9. #9
    Mark's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Dec 2014
    Location
    Tucson AZ
    Posts
    1,105

    Default

    It sucks when you go to sell your toys and can only get pennies on the dollar, excellent buy for someone.
    1999 R/C Solar yellow

  10. #10

    Default

    Thanks guys. The price I listed for it is a steal!. I have a couple people interested in the whole roller. Let's see what happens.
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  11. #11



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Who converted your front hubs to 5 lug?
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  12. #12

    Default

    A local machine shop.
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  13. #13
    bruizer28's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Fort Saskatchewan, Alberta
    Posts
    326

    Default

    Quote Originally Posted by krs1r/t View Post
    I hate to hear you getting out of the genIII game. I was looking forward to going back and forth with you this season.
    Hopefully the danno built motor in bruizers truck runs as good as yours to take your place.

    Good luck finding a new roller and building a street ride
    chris if I didn't have to drive accross two countries and then deal with the border a-holes I would be all over this faster than a fat kid on a smartie. Its killing me to have to sit back and watch.

  14. #14

    Default

    What motor/ trans/electronics is it set up for?
    Quote Originally Posted by blackknight View Post
    I guess taking the cap off would be too hard to check the fluid level, do you have a see thru engine block so you can also see your oil level?

  15. #15

    Default

    Interested in the calvert shocks if you part.

    11.09@123

    Pay now or pay when it comes home on a flatbed. Sometimes both. Part of the game.

  16. #16

    Default

    727 trans and whatever motor you want. Electronics are universal for any application
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  17. #17


    krs1r/t's Avatar
    want more inchs STROKE IT

    Status
    Offline
    Join Date
    Aug 2009
    Location
    vineland, nj
    Posts
    5,863

    Default

    Quote Originally Posted by bruizer28 View Post
    chris if I didn't have to drive accross two countries and then deal with the border a-holes I would be all over this faster than a fat kid on a smartie. Its killing me to have to sit back and watch.
    Are you going to make some passes at the track this year?

    Bad Luck Truck
    Current setup
    „R„block 429ci W5 heads 700hp N/A
    1/8 mile #'s 6.47@105 1.37 60’ 10.23@131

    Old 1/4 numbers below with 408
    Fastest N/A 2010,2011,2014
    477-RWHP ?-RWTQ

    11.244 ET @ 119.71mph N/A
    FOXHOLE RACING
    "If you like me good, if you hate me, even better!"
    Chris

  18. #18

    Default

    Ok. So u had a 390/727 and carb. U left all the factory plugs for the ecu and the factory transmission. If I wanted to put a 408/46re. It would go in no problem. Everything is still there.
    Quote Originally Posted by blackknight View Post
    I guess taking the cap off would be too hard to check the fluid level, do you have a see thru engine block so you can also see your oil level?

  19. #19

    Default

    Quote Originally Posted by NicksRTCC01 View Post
    Ok. So u had a 390/727 and carb. U left all the factory plugs for the ecu and the factory transmission. If I wanted to put a 408/46re. It would go in no problem. Everything is still there.
    No all of that has been removed.
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  20. #20

    Default

    Cmon guys this is a stupid ass deal! It's such a steal! If any of you guys could spread the word lemme know. I want her to go to a good home
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  21. #21

    Default

    How much are you looking to get for your B&M Pro shifter, shipped to 98682?

  22. #22

    Default

    Quote Originally Posted by Jakl View Post
    How much are you looking to get for your B&M Pro shifter, shipped to 98682?
    I'm selling the roller first. I won't do a part out unless I have to
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  23. #23

    darkenedrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2013
    Location
    Norman, Oklahoma
    Posts
    1,259

    Default

    Hate to see you selling it but get it. Your still wanting to stick with an R/T right?

  24. #24

    Default

    I'm going Gen 2 this time around.
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  25. #25


    99blackrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Saskatchewan
    Posts
    874

    Default

    If only you weren't so far away and our dollar was better sad to see you selling it. Once nice truck you got there......for a red one that is. Good luck and I hope you don't end up parting it.
    Chad
    1999 Dodge Dakota R/T



    Mods
    Paxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s



    http://megaswf.com/s/2536929

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •