Well I have run into a few issues with the truck since I put it in storage running.
First, I had an engine bay fire on the passenger side, it did some pretty good damage to the wiring harness. I have a theory that the wire for the O2 sensor was laying on the exhaust and eventually melted the wires and caused them to arc and start a fire. The harness was redone for the most part, a couple sensor wires here and there probably still need to be done. Thanks to Dakfink for redoing that for me.
The manual rack I put in broke a mount possibly from low tires causing to much pressure on the mounts, so the steering is hosed right now. Going to take that off and see what the issue is.
Going to pull the engine also and have Sloan racing go through it to make sure it is good to go. Also do some port matching and open up the intake.
Going to be a while before I can get it done, but at least I can go in the garage now and do things to it.