Wasn't able to make it out that way. I'll be heading out there after Christmas need that passanger door and fender off the Amber fire.
PPH headers, 2.25" y-pipe, 3" dumped before axle spintech 6000, Cold air intake, 2bbl m1, Hughes 52mm throttle body
1evilrt,
I just heard back from Dodge about the manufacturer of the roll pan.
Sorry, it's Proprietary. Ha!
Jim
1998 Dakota Sport
5.2L 5-spd
3.92 rear
GTS Viper Style Ram Air Hood
Viper hood ornament
Original Equipment Factory Roll Pan
MBRP Cat-back Exhaust
Grillcraft grill inserts
Custom two-tone paint
Custom logos and striping
Your problem isn't the problem. Your reaction is the problem.
Hey motorhead I need the protective seal on the headlight assembly (driver&passenger) 2001 dakota. Does this guy have a website. Thanks
Eric McPike
M1 intake, CAI, 53mm Throttle Body, 1.7 Harland Sharp rockers, Short Headers, SCT tuner, 2" drop springs up front, 2" drop hangers in the rear
I could use some stock taillights!
Once i get running right i might take a trip there myself. Maybe a dumb question but are durango front doors same as the trucks, can they be switched
Josh - 98 BLK RC - Mad Milkshake Maker
Previous
99 BLK RC - Mad Trash Hauler - sold
99 DA RC - mad dak - Danno Stole it
01 SLVR RC - mad sexy - retired - then died
99 IB RC - mad RT - gone to heaven..
Former Certified member of the 11 Second NA RT Club
I thought of it before but never looked into it. I have few dings right on the crest of the body line im guessing from parking lots. Motorhead did u ask what his prices were on the engines (5.9)
If you find a drivers side door panel in agate for 98-00 power options please scoop it up and I'll take care of whatever it costs to ship.
2000 CC
11.37@122
All four of you guys have private messages from me with the name and number of the guy who owns the yard.
I am more than glad to give it to fellow members of this club, but I'm not posting his number for the rest of the internet to see.
Your problem isn't the problem. Your reaction is the problem.
I need front abs sensors 2wd dakota.
I got burned by member on here f u you know who you are selling 4wd sensors as 2wd. Can you help?
I doubt you find it, but if you find a 01-04 manual center counsel. I want to put a manual swap in but I want it to look close to factory so I've been searching for some time for one. I have the older style, but I need the 01-04 style.
I have contacted him twice about a console, and all he says is he has lots of console, but when I ask specifically about an 01-04 style, I never hear back from him. I am only about an hour from him, but I have not had much luck getting straight answers from him, so I haven't personally visited the junk yard. I have found some NOS on ebay (just the top plate, as you don't need the whole console), for around $85. Then you would need the boot, and front cupholder, which I believe can still be bought new from Dodge, or you can find them sometimes on ebay for cheap.
Last edited by 2dakotas; 12-07-2015 at 09:30 PM.
2012 Grand Cherokee Limited Wife's car - 4X4, Hemi
2003 Dakota RT RC, Hughes intake and throttle body, D1SC Procharger, 5-speed
2009 Challenger RT, 6-speed, sportlines, x-pipe, Dynatech mufflers.
This yard is in Kentucky or Tennessee isn't it?
Any chance someone has this guy's information? The Craigs List link is bad.
It's only been 25 months...
--Tom
**Photobucket can suck my nut**
I'm a douchebag